Search results

That help it has a remote also and you can add the grid for backing up I like it

TITLE: FILENAME: Page 2 of 2 CREATOR: DATE: David Cunliffe 5.5 Inch Rear Vision Camera.vsd 14/11/2012 5.5" REAR VISION CAMERA SYSTEM DC ELECTRONICS Fitting the monitor into the mounting bracket First remove the insert from the bracket by pushing down on the locking lever and lifting out the...

I'm using a rear view camera from dce with a 5.5 inch screen and we 3d printed a camera mount that goes on the diffuser in-between the wing mounts. we also made it extend out 5 inches from the diffuser to get a better view without seeing the wing mounts DCE, Inc. | Manufactured in North Carolina

My transaxle is 30 1/4 overall length plus 1 1/2 for the barrel sensor so that is correct the clutch is a Kennedy Engineering Products 228 mm 6 puck sprung hub twin disk that will handle 945 lbs of torque with higher rated clutches available Mendeola Powertrain has bells for Ford and Chevy and...

Davies Craig 150lph pump with header and controller is going in my SLC

I got everything from Ian at Mendeola Powertrain for just under 18k, included a dual disk 9 inch clutch pressure plate and flywheel, and the starter They have a variety of gear ratios and bell housings They also have a lower cost trans with syncros that they can turn into a dog box but it would...

Haven't been on in awhile, Fran is almost done with my chassis. here is the Mendeola sequential 5 speed for my car that Ian did for me, should be pretty bullet proof. Using a load cell shift knob to control the ECU for the ignition cut and auto blip

S5 is a little shorter than the recardo very strong easy to rebuild, Fran didn't indicate to me that it would not fit. I'll post dimensions for the Mendeola when I get it here, not looking forward to shipping cost from CA

Tom contact Ian at Mendeola Powertrain <cite class="_Rm">www.mendeolapowertrain.com/</cite> INTRODUCTION SALE​. SDR5 "COMBO BOX" $7900.00. With 4.11 R&P. LIMITED TIME ONLY! $8750.00 REGULAR PRICE. HOME · In House Gearing ... My gearbox ran me 17,400 but is sequential, and they are sending...

At WOT running around 170 I don't think you will hear any pump noise Seriously KISS principle keep it simple. My car has the FIA bladder so external as Will said is easy maintenance and you can isolate the noise with an additional shield between the pumps and interior with sound deadner

Check this one out Bullet Camera, Standard Def 600 lines [CAM-600] - $250.00 : Zen Cart!, The Art of E-commerce I plan to use this with some sort of 7 to 9 inch monitor Will recommened Chase cam and that one is designed for racing

check Mendeola Powertrain, They have a synchronized transaxle with chevy bell around 10K. They are doing a sequential 5 speed for me with twin 9 inch clutch disks Talk to Ian I talked to Chris at Weddle they sent me to Ian, Weddles stuff is mainly offroad and the gear ratios weren't great for a...

I'm new to this forum stuff so bare with me, my wife was OK with this endeavor even after she saw the invoices for parts. All I had to do to keep peace was remodel the master bath with a walk in shower LOL. I looked at a lot of different possible car builds and Frans kits are the best I have...

Infinity AEM ecu has TC and LC and works with DBW, They are trying to add auto blip to the software

Hey if anyone needs a load cell shift knob for flat shift or auto blip KA sensors has one at a better price than the Ligenfelter one for the vette http://www.kasensors.com/sites/default/files/downloads/GST.412aU.pdf

Mendeola Powertrain has a nice transaxle with or without syncros Mendeola Powertrain I ordered a S 5 sequential with dual 9 inch clutch, starter, LSD, penny and Giles sensor on the drum for 17.5K SDR5 for street use is 8750.00

I'm looking at the MOMO Daytona Evo 34 tall, 22 at the shoulder 15 wide, I need a full containment seat and this looks like it should work well for me. But I'm only 5'6 They make a xl seat 16 wide

Hey everybody I'm Denny not doing a GT40 but Fran is building my SLC now It will be 95% race car occasional road cruise. I plan on documenting the build and hopefully can offer help to others. I'm going to be running a 525 HP LS3 crate motor, with a Mendeola SR5 sequential transaxle, AEM...