Search results

Thank you Nick I enjoyed the photos. Had an MG YB as you have in the photos when I was a teenager. Kit cars only now.

Ken I have both there is NO difference. I got the Audi starter from local dealer.

Jordon, I posted this some time ago: https://www.gt40s.com/threads/battery-starter-dilema.49641/ Scroll down I still have the problem today. I solve it by starting with a QUICK stab and then a HOLD until started on the start button. Try it. It works every time when cold and most of the time...

Well done Marty, glad to have you join us, Jerry

I have been thru 2 of the RCR SLC Centroid fuel senders. Neither was able to keep its settings for more than 5 weeks. A common failure was reverting to reading FULL while driving part full. Centroid sent me a data logger to watch what was happening. They never came up with a solution although...

Frank, The real test for me that isolated the problem to the starter was a very large marine cranking lead acid battery connected 3 feet from starter terminal with 00 gauge positive and 00 gauge neg to starter mounting bolt. Solenoid engage signal from same battery. This isolates everything in...

I posted this some time ago, maybe it will help. >>>>>>>> https://www.gt40s.com/threads/battery-starter-dilema.49641/#post-503855 Since then I am still using the same starter. I have 2 of them, one bought at a Lambo dealer and the other on eBay for an Audi R8. They are both the same Bosch...

Hi Shaun, I used the solid brake and clutch lines that came with my SLC kit. My Ultima GTR has all flex lines. These cars are similar so a good comparison. Brakes and clutch on each have a solid feel, very much the same. Good Luck, Jerry

I molded the battery enclosure. It adds just a few ounces and protects the battery from a direct blast of warm radiator air.

Thank you for your concern Neil. The battery is a Braille Lithium Ion so vapor problems do not exist. The photo containing the battery is an old one so here are two current that show more detail.

Will is right about the fan mounting to the radiator. I live in Florida and regularly sit in snowbird traffic with 90+ and have no engine (LS7) overheating problems, it's me that overheat!

Looking at your photos the crack spans the Aerolatch and dowel area. There would be some strain in that area but not nearly enough to cause your problem, unless you have a bad resin/glass ratio or inadequate laminate thickness. I would suspect thickness especially if the laminate has the...

I am using RCR A/C pump bracket on an LS7 and 373K4 4PK0945 belt. I have a note from the time of fitting that 365K4 from RCR is wrong belt. <style type="text/css">p { margin-bottom: 0.1in; direction: ltr; color: rgb(0, 0, 0); line-height: 120%; text-align: left; }p.western { font-family...

I have a Braille Lithium battery (6 lbs weight) in my SLC. It cranks an LS7. I have cutoff switch OFF when garaged. I have no cranking or battery problem. I also have an Ultima GTR with SBC race engine, 6.3 ltr. I use a Braille glass mat lead battery B3121 21 lbs weight. I have just replaced...

I have the fuel vent hose running from the top fitting on the tank end to the fill hose, just above the tank it is then attached to fill hose up to Sparko tiller. I have a fitting for the hose into the Sparko just above the fill hose level. This works just fine I have no filling problems, no...

<style type="text/css">p { margin-bottom: 0.1in; direction: ltr; color: rgb(0, 0, 0); line-height: 120%; text-align: left; }p.western { font-family: "Liberation Serif",serif; font-size: 12pt; }p.cjk { font-family: "Liberation Serif"; font-size: 12pt; }p.ctl { font-family: "Liberation Serif"...

Cam I hope this helps you. This fuel fill hose has a molded 90 deg bend and can be cut each side of the bend and with the 45 deg hose will make a very neat installation. <style type="text/css">p { margin-bottom: 0.1in; direction: ltr; color: rgb(0, 0, 0); line-height: 120%...

I still have the calipers fitted but your are right Chuck the parking brake is not effective. One reason being that there is no balance bar at the lever cable end to evenly distribute the load on the pads.

Colin, the Koso has both pull up and pull down resisters built in you do not need to add anything externally. Look at pages 30 and 31 in it's manual. On page 30 you set the input pulse for your tacho. I have an LS7 and set Koso on value 2. On page 31 set the tacho impulse it can be either high...

Very sad so many people died and were injured in what was an avoidable fire. That building should have had Phenolic foam insulation and glass reinforced Phenolic resin panels. This material does not burn and for cost is quite viable for an application like this. It also makes great lightweight...