17" Halibrand Fitment Issues?

Has anyone had issues with fitting 17" Halibrands on their RCR? There is VERY little clearance between the wheel rim and the steering arm. See below:

OIUSj8KYk7jpQoNM6cJLS671wdFz0h2v81QaTKBv6Bc_t5K29NEh_RN3UDGGLfW_lmcvwQ=w1366-h768-no


They make contact when cornering and under braking. Has anyone dealt with this problem?

Thanks
 

Fran Hall RCR

GT40s Sponsor
Vaugn,
use the rearward hole in the steering arm , that's why its there and remove the excess material where the forward holes is located....we have not used a tapered tie rod for many many years btw.
Or call Brittany and order our new billet steering arms that are available ...easier bump steer adjustment too
 
Back
Top