hello people in my computer, (rumour has it that some of you are "real people"). this week i started building the upper part of the chassis, made of 40x40, you know, the bit with the stagered recess for the gear shifter. i was ok until the front 2 crossmembers. my plans are a bit vague here! the side profile shows the crossmembers welded on top of the chassis rails, but the view from above doesn't show how the box section is cut at the ends.
i'm only conserned with the 40x40, not the 25x25 that extends forward of this. there is a 6mm plate on each side in this area. i would love some pics of your chassis in this area, cheers in advance, glen
i'm only conserned with the 40x40, not the 25x25 that extends forward of this. there is a 6mm plate on each side in this area. i would love some pics of your chassis in this area, cheers in advance, glen
