Quote:
|
Originally Posted by Howard Jones Brett, I think you should weld in a 1/16" thick steel plate to mount the peddle box on. Sort of the same way the seats are mounted to the steel strips running across the floor but wide enough to mount the peddle box. I think the thin floor material will flex when you stand on the brakes.
Also don't forget the 7/16 shims under the steering rack. This is the "fix" for bump steer on these cars. Real easy to do now.
Nice job so far!! |
Thanks Howard, I constantly go back to your build to find out ways to do stuff
.
The steering rack was sorted out when Roy Smart came round a while ago. I am currently trying
to design the pedal box and make it adjustable so my wife can drive it one day (I promised). However, I am thinking having an adjustable seat back may be easier.
Question for anyone. As the chassis came with the floor in, what is the best way to weld a strengthening plate for floor mounted pedals.
Brett