GT40s.com - View Single Post

Jeff Hamilton · 09-26-07, 05:34 PM

To get the rubber out drill the rubber with a 1/4" drill bit. After you drill a hole in it just keep drilling and the bit will walk arount the outside of the rubber and spit it out. Then take a sawzall and cut the metal.
Jeff Hamilton

09-26-07, 05:34 PM	#6 (permalink)
Jeff Hamilton Jeff Hamilton Bronze Supporter Join Date: Dec 2005 Location: Ohio GT40: RCR Posts: 91 Rep Power: 3	Re: Removing suspension bushes To get the rubber out drill the rubber with a 1/4" drill bit. After you drill a hole in it just keep drilling and the bit will walk arount the outside of the rubber and spit it out. Then take a sawzall and cut the metal. Jeff Hamilton