GT40s.com - View Single Post

John · 05-08-08, 05:09 AM

well its taken awhile but i have finaly worked out how to undress the main chassis file, so now its down to bare bones so to speak i have posted some pics to get an opinion from the technicaly minded.
just be awhere there is still one x brace and probaly a diagonal to go into top of engine bay.
appriciate honest opinions
roll centres ive worked out as accuratly as i can, with bad eye sight and an old slide rule at 40mm front and 50mm rear, center of balance with engine installed, wheels on , no fuel in tanks etc just as it sits with me in the seat, is directly under my bum or approx 300mm in front of roll bar bulk head.
Cheers John

05-08-08, 05:09 AM	#19 (permalink)
John kaspa A Tenth Join Date: Apr 2008 Location: Feilding NZ Posts: 112 Rep Power: 2	Re: new build a Porsche LMP well its taken awhile but i have finaly worked out how to undress the main chassis file, so now its down to bare bones so to speak i have posted some pics to get an opinion from the technicaly minded. just be awhere there is still one x brace and probaly a diagonal to go into top of engine bay. appriciate honest opinions roll centres ive worked out as accuratly as i can, with bad eye sight and an old slide rule at 40mm front and 50mm rear, center of balance with engine installed, wheels on , no fuel in tanks etc just as it sits with me in the seat, is directly under my bum or approx 300mm in front of roll bar bulk head. Cheers John Attached Thumbnails Last edited by kaspa; 05-08-08 at 05:26 AM.