FS USA Rebuilt 930 late bellhousing trans with OS Giken LSD, NIB MXL Pista, kennedy clutch

[Cam]

Thought i might have some luck on here selling this. The only downside is that it's not a flipped ring and pinion.

Had this rebuilt by Marty Mehterian (well known PCA instructor) several months ago. It was completely disassembled, ultrasonically cleaned, parts including gaskets/dog gears/bearings, etc were replaced, diff installed, a California Motorsports billet side plate installed, and re-assembled.

Completely stock gearing, including ring and pinion. Transmission is from a '83 euro 930.

Asking price: $5500, outright, OBO. Please send offers by PM, or e-mail to clarkcameronm at yahoo dot com

Local pickup much preferred. I'll deliver within 100 miles of San Jose, CA for free. I will ship at the buyers expense of me getting a pallet and materials. This will also take longer to facilitate as I do not have a truck or much free time during the weeks.

There are pics on my thread over on the porsche forum: Rebuilt 930 4 speed late bellhousing with OS Giken LSD - Pelican Parts Technical BBS

I also have an ls1 adapter plate and stage 2 clutch from Kennedy Engineering, and a starter. All brand new in box.

 

[Cam]

Re: Rebuilt 930 late bellhousing trans with OS Giken LSD, NIB MXL Pista, kennedy clu

I also have a brand new MXL AIM Pista, complete with GPS05 unit, data expansion hub, and CAN/OBDII ecu bridge. Looking to get $2400 obo for everything (that's $300 off the cheapest retail you can find)

 

[Cam]

Re: Rebuilt 930 late bellhousing trans with OS Giken LSD, NIB MXL Pista, kennedy clu

I also have a stroked almost complete LS3 with just under 3,000 miles on it. Stroked to 6.9L, made 520 rwhp and 480 tq in a CTS-v. Has prettymuch everything you need minus harness/ecu. Comes with factory ls3 manifold with injectors, ported ls3 dbw throttle body, al new gaskets, new valve covers, new coil packs (all this needs to be installed) Asking $7400, cash, picked up. Would prefer not to ship, but will do so at buyers expense, though I do not have a truck and shipping will delay the process by a few days. If asking price is met, will include a free bosch 044 fuel pump (not otherwise for sale).

Here's the kennedy 930 adapter, and Stage II clutch/pressure plate assembly. Paid just over $2100 for it last december, didnt even take it out of the box until the pics just now. Looking to get $1900 OBO for it.

 

[Cam]

Re: Rebuilt 930 late bellhousing trans with OS Giken LSD, NIB MXL Pista, kennedy clu

Bump for Monday! I've lowered my asking price on the engine from $7800 to $6600.
The trans is still at $5500. If somebody is interested in the adapter, clutch/pressure plate/fly/starter, trans, and engine, I'll do the whole thing for $13,500 and include the Bosch 044 fuel pump.

 

[Cam]

Re: Rebuilt 930 late bellhousing trans with OS Giken LSD, NIB MXL Pista, kennedy clu

Engine has been sold. Everything else still available.

 

[Cam]

Re: Rebuilt 930 late bellhousing trans with OS Giken LSD, NIB MXL Pista, kennedy clu

engine sold, transaxle sold, MXL pista sold.

What's left: Kennedy stage II clutch/pressure plate/flywheel for Late bellhousing 930 box, Kennedy adapter plate to mount 930 trans (non-G50) to LS series engine block, high torque mini starter for 930 box and kennedy flywheel.

Please send PM if interested in any parts.