MK-I MK-II MK-III MK-IV GULF MIRAGE J-CAR LOLA
   | Notices | Hi member,
welcome to GT40s.com! If you've never posted on the forum maybe give it a go by introducing yourself in the Introduce Yourself Here forum. Also, think about becoming a Forum Supporter at GT40s.com. Becoming a supporter will allow you more PM space, an avatar, and the money is used to keep GT40s.com running.
Enjoy the forum!
Welcome to the GT40s.com, the World’s Largest GT40 resource.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, view pictures, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, Join Our Community Today!
Why not start with your first post today and become an active part of GT40s.com now! And, if you find you enjoy GT40s.com think about becoming a Forum Supporter. | | GT40 Build Logs For build threads and build diaries only. | 
01-03-08, 06:50 AM
|
#1 (permalink)
| | nota2266 Lifetime Premier Supporter 
Join Date: May 2004 GT40: Kurrajong, Australia
Posts: 358
Rep Power: 8  | GT 40 from CAD to Metal
Watch the development of a Mono from CAD models thru FEA, suspension dynamics to finish.
__________________
Trevor Booth,
Finished assembling a pile of bits incl, mono, 302W on IDF's,ZF, 15" pin drive BRM. | 
|  | |
01-03-08, 06:53 AM
|
#2 (permalink)
| | nota2266 Lifetime Premier Supporter
Join Date: May 2004 GT40: Kurrajong, Australia
Posts: 358
Rep Power: 8 | Re: GT 40 from CAD to Metal
more bits
__________________
Trevor Booth,
Finished assembling a pile of bits incl, mono, 302W on IDF's,ZF, 15" pin drive BRM. | |
| | |
01-03-08, 07:43 AM
|
#3 (permalink)
| | nickgomez Rookie 
Join Date: Dec 2007 Location: Malaysia GT40: None
Posts: 18
Rep Power: 1 | Re: GT 40 from CAD to Metal
Trevor this is cool stuff! How did you get the dimensions? | |
| | |
01-03-08, 03:07 PM
|
#4 (permalink)
| | nota2266 Lifetime Premier Supporter
Join Date: May 2004 GT40: Kurrajong, Australia
Posts: 358
Rep Power: 8 | Re: GT 40 from CAD to Metal
The dimensions came from a mono built in NZ in the early 90's. About six were built. I assembled one of them in 2004-2005. I believe the builder of them took measurements from an original car P1030 that was at one time in aust.
__________________
Trevor Booth,
Finished assembling a pile of bits incl, mono, 302W on IDF's,ZF, 15" pin drive BRM. | |
| | |
01-03-08, 10:22 PM
|
#5 (permalink)
| | nickgomez Rookie
Join Date: Dec 2007 Location: Malaysia GT40: None
Posts: 18
Rep Power: 1 | Re: GT 40 from CAD to Metal
This is very interesting. Any possibility that there will one day be an 'open source' GT40 for builders around the world, following some sort of rigidly defined ISO document or set of drawings, just like what the Haynes 'Build Your Own Sportscar' by Ron Champion did for the 'Locost' type Lotus Seven inspired roadster brigade? | |
| | |
05-09-08, 07:23 AM
|
#6 (permalink)
| | nota2266 Lifetime Premier Supporter
Join Date: May 2004 GT40: Kurrajong, Australia
Posts: 358
Rep Power: 8 | Re: GT 40 from CAD to Metal
some more progress
__________________
Trevor Booth,
Finished assembling a pile of bits incl, mono, 302W on IDF's,ZF, 15" pin drive BRM. | |
| | |
05-13-08, 03:50 PM
|
#7 (permalink)
| | Bill D I Have No Life 
Join Date: Sep 2001 Location: Camarillo, CA
Posts: 2,381
Rep Power: 34 | Re: GT 40 from CAD to Metal
That is soooo cool!! Have you many any parts yet? | |
| | |
05-13-08, 05:38 PM
|
#8 (permalink)
| | CharlieM Silver Supporter
Join Date: May 2004 Location: Massachusetts GT40: Scratch built
Posts: 222
Rep Power: 7 | Re: GT 40 from CAD to Metal
Nice work Trevor. What CAD and FEA software do you use?
Charlie | |
| | |
05-13-08, 07:48 PM
|
#9 (permalink)
| | nota2266 Lifetime Premier Supporter
Join Date: May 2004 GT40: Kurrajong, Australia
Posts: 358
Rep Power: 8 | Re: GT 40 from CAD to Metal
Pro Engineer WF 3 , ANSYS FEA . The model still has a lot of flanges for welded joints etc to be added and cutouts for overlaps to be tidied up.
I have not made any sheet metal parts as yet. Currently sorting suspension before finalising the pickup points and necessary reinforcing on the tub.
__________________
Trevor Booth,
Finished assembling a pile of bits incl, mono, 302W on IDF's,ZF, 15" pin drive BRM. | |
| | |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | | | | Thread Tools | | | | Display Modes |  Linear Mode | | 
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts
HTML code is Off | | |
All times are GMT -4. The time now is 04:14 AM.
 |
