welcome to GT40s.com! If you've never posted on the forum maybe give it a go by introducing yourself in the Introduce Yourself Here forum. Also, think about becoming a Forum Supporter at GT40s.com. Becoming a supporter will allow you more PM space, an avatar, and the money is used to keep GT40s.com running.
Enjoy the forum!
Welcome to the GT40s.com, the World’s Largest GT40 resource.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, view pictures, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, Join Our Community Today!
Why not start with your first post today and become an active part of GT40s.com now! And, if you find you enjoy GT40s.com think about becoming a Forum Supporter.
GT40 Tech - Exterior, Interior, AC, & TrimAll that other stuff not in categories above.
Does anyone out there know which wires are which on the standard Ford Cam and Crank angle sensors
The plug on the crank angle sensor has 2 wires on it
Grey/Yellow and Black/Red I would guess that the Grey/Yellow is the Ref wire and the Black/Red is the Zero volt wire
Similarly the Cam angle sensor has 3 wires
Light Blue/Orange (which may be the 8 volt supply)
Dark Blue with spiral orange trace which is probably the sync wire as it is shielded.
and Black/White which seems likely to be Zero Volt.
Can anyone tell me if my assumptions here are correct or not
The crank sensor blk/pnk (not red?) is + and the gry/yel is -. dkblu/or cam sensor output to ecu. blk/wht ground. red 12v switched. this is from mitchelle on demand for a 98 explorer, i dont know why i have red showing and you dont, you have the dark blue, maybe the same wire as the others seem to line up.
Linear Mode
