Hi to all
I have finally got round to sorting my clutch slip when hot
I am using the un1 gearbox mated to a BMW 3.2 evo e36 with a bmw clutch
Having stripped it down last week i cam across the following problems
The pressure plate badly burnt
The flywheel badly burnt with a hairline crack in it
The release bearing was stuck at the end of the guide tube there is a groove in the release bearing at an angle
The release bearing has a welded piece of steel on it the bearings are gone
The clutch release fork was nearly touching the gearbox casing when the clutch is disengaged
The release fork is slightly bent at the top
I now need a new release fork and a bearing set up ( I think )
The total length of the bearing is 50mm from where it is in contact with the release fork to the end
I have 10mm clearance between the end of the bearing to the pressure plate when the release fork is right back do I need this
Not that good at putting pen to paper hope you can understand this
Any help i would be very grateful
Enclose a couple of photos
Thanks Jon
"http://www.freeimagehosting.net/newuploads/oahfr.jpg"
tidxv.jpg at Free Image Hosting
I have finally got round to sorting my clutch slip when hot
I am using the un1 gearbox mated to a BMW 3.2 evo e36 with a bmw clutch
Having stripped it down last week i cam across the following problems
The pressure plate badly burnt
The flywheel badly burnt with a hairline crack in it
The release bearing was stuck at the end of the guide tube there is a groove in the release bearing at an angle
The release bearing has a welded piece of steel on it the bearings are gone
The clutch release fork was nearly touching the gearbox casing when the clutch is disengaged
The release fork is slightly bent at the top
I now need a new release fork and a bearing set up ( I think )
The total length of the bearing is 50mm from where it is in contact with the release fork to the end
I have 10mm clearance between the end of the bearing to the pressure plate when the release fork is right back do I need this
Not that good at putting pen to paper hope you can understand this
Any help i would be very grateful
Enclose a couple of photos
Thanks Jon
"http://www.freeimagehosting.net/newuploads/oahfr.jpg"
tidxv.jpg at Free Image Hosting