Ramlift

Michael Fling

Supporter
Ramlift Questions:

1. The Ramlift cylinders have 2 ports. 1 goes to the lift motor and the other is plugged. Does it matter which port is plugged?

2.The exit line from the Ramlift cylinder can be adjusted as to where they exit. They can exit towards the front, towards the car, or to the rear. What is the preferred exit position?
 
Ramlift Questions:

1. The Ramlift cylinders have 2 ports. 1 goes to the lift motor and the other is plugged. Does it matter which port is plugged?

2.The exit line from the Ramlift cylinder can be adjusted as to where they exit. They can exit towards the front, towards the car, or to the rear. What is the preferred exit position?

Good morning Michael.

I've learned that it's easier to call Simon @ Ramlift. He machines all the parts, and can answer your questions right away.

Simon Hameka
(281) 923 3470
ramliftpro at comcast dot net.

Hope this helps.
Take care.

Mike
 

Fran Hall RCR

GT40s Sponsor
Michael.
I actually said the same thing to Mike via email yesterday morning.

Simon is very easy to chat to and very helpful
 
Ramlift Questions:

1. The Ramlift cylinders have 2 ports. 1 goes to the lift motor and the other is plugged. Does it matter which port is plugged?

2.The exit line from the Ramlift cylinder can be adjusted as to where they exit. They can exit towards the front, towards the car, or to the rear. What is the preferred exit position?

Plug either port, doesn't matter.
The exit line will route best facing foward.
 
Back
Top