Starting to map out my BMW MK60 ABS brake install.
This system was factory installed on 2003 to 2006 BMW M3 cars. It uses 4 active speed sensors, front and rear brake pressure sensors/transducers, steering wheel angle sensor and a yaw rate sensor. The ECM for the system is mounted to the pump. It is very popular due to it's stand alone capability.
Incorporating the yaw and steering angle sensors gives it dynamic stability control.
Here are the OEM BMW part numbers:
brake pressure sensors-#34521164458 (2 required)
yaw rate (DSC Sensor)-#34526764018
ABS pump/ECM-#34512282250
active wheel speed sensors F right #34526792896
f left #34526792897
rear l/r #34526752683
The ABS pump/ecm and yaw rate sensor will be used and the pressure sensors and wheel speed sensors will be new. The wiring harness comes with a steering position sensor I believe. I might try and use the sensor already installed on the XLR column if possible.
The wiring harness can be purchased from 3DM Motorsports and is made by Racing Harness Technologies. (Doug Wardell). They can tailor it to your application.
MK60 Motorsport ABS – Tagged "MK60 Motorsport ABS_Universal Kits" – 3DM Motorsport
Category:MK60 Motorsport ABS - 3DM Motorsport Info
I'm most likely going to only use the rear BMW style of active wheel sensors. They look more user friendly in shape.