joecarvett - joe lucia

Just now seeing this. Yes I do.

Hi From Florida.Been busy installing weber intake and new BRM wheels 8&10"on my car and had trouble getting VR or ZR tires.had to settle for only thing available for the rear,BF Goodrich Radial TA 295-50 R 15 which will fit up to 11"rim.Also spent time measuring for the BRM clearance.Am using stainless steel spinners on them,less dents.Had a problem finding water connection for Cobra intake so i made one from 1 1/4" pipe and drilled and tapped for water guage and bleeder.Not too easy with no space.Used green stripe hose.Also removed muffler system that connected the 2 headers together and installed 3"straight exhausts tilted down at the rear.Also new MSD billet distributor, coil and Ford Racing wires.Finishing carb linkage and fuel lines and have to adjust webers.Alot of work for an old guy but enjoyable when done.Don't know how to post a picture or i would.Joe

Hi from Florida.Have been busy installing weber intake and new BRM wheels 8"&10" on my car and had trouble getting VR or ZR tires.Had to settle for the only thing available for the rear, BF Goodrich Radial TA 295- 50 R 15 which will fit up to a 11" rim.Also spent time measuring for the BRM clearance.Am using stainless steel spinners on them,less dents.Had a problem finding water connection for cobra intake so i made one from 1 1/4"aluminum pipe and drilled and tapped for water guage and bleeder.Not too easy with no space.Used green stripe hose.Also removed the muffler system that connected the 2 headers together and installed 3" straight exhausts tilted down at rear.Also new MSD billet distributor and Ford racing wires.Finishing carb linkage and fuel lines and have to adjust carbs. Alot of work for an old guy but enjoyable when done.Will have more time when done with a car that was running before i started tinkering.Don't know how to post a picture or i would.Joe