roger reid's latest activity

Oh happy day!!:) My title came in the mail today. Next up is yet another trip to the DMV for a license plate, a professional tune by...

One item on the to do list is to see if the AIM PDM can actually control the Vintage Air Blower Motor. I wanted to ditch all the wiring...

In the model train hobby, kitbashing is the practice of making a new scale model by taking pieces out of multiple kits. In this post I...

Took it to a exotic car event here in Austin today. Not my normal scene, but had a good time. The SLC got quite a bit of attention. I...

Sunday, April 21st COTA with Chin Motorsports. The weather was cold in the morning with the air temp at about 60F@ 8 am and the wind was...

This weekend I finally redid my alignment after putting it off way too long. I did an initial rough alignment back before I had the body...

update of this week end Installation of radiator with grommets. There is a little flex but not too much (hopefully enough). Bolt have...

I'm curious if anyone else has run in to this issue: When turning moderately hard to the left with a full tank, I was having issues with...

I cut a hole on the rear clam for the clam to clear the transmission when fully opened , that meant the rear hinge had to be split in...

Finally have the car back together with paint! I'm cobbling together a video, but in the mean-time here are a few pics. Overall I'm...

Brake bleeder is fixed! Wow that was a pain in the butt. Helicoil, 90-degree countersink bit to re-grind the seat along with some valve...

I would remove the battery case from its mounting bracket. The fuse block would stay in place. I reversed the top two screws to keep the...

Finally at the point of installing the electrical components. This thread shows the approach taken to install the battery cables, fuse...

The SLC is a cool ride and I hope the AC system will blow “Cold As Ice” with a leak free system… This post covers crimping the AC...

After frustrating experiences with trying to epoxy nuts to the backside of panels (and Nutserts or Riv-Nuts that spin in their holes), I...