Kirby I send you a PM.
OK guy's I'll admit I'm sometime not the sharpest knife in the drawer but I'm stumped on this one. Kirby was very nice and loan me his set of tools. Well today I broke the right side tool. I started by removing the axel nut with the 36mm socket Kirby supplied. Next I disconnected the CV joint at the wheel end and moved it out of the way. Being the right side it has left hand threads so it was tough keeping the tool from trying to undue itself. Using my ¾” drive ratchet I tightened the big bolt that is supposed to push the axel out. I thought I was in luck when I heard a pop but instead of moving the axle it popped the welds but only after bending the cross piece. :embarassed: Did I miss something, will my name go on the wall of shame and be shunned forever? Sorry Kirby I'll have Olthoff send you a new set.