Can anyone help me to identify what drive shafts I have from these photos, sadly I broke this one last Saturday at Goodwood.
Dimensions are:-
+ Overall length 440mm
+ Outside diameter at splines 27.5mm
The CV joint is retained in position on the splines by two circlips the inner one is approx 36mm from each end of the shaft and the outer is approx 5mm from each end.
+ The CV joints are 100mm diameter
Car is GTD, Fitted with Chevy 350, mated to Porsche G50/50.
Then most important of all where can I get one or am I going to have some made?
JBW
Dimensions are:-
+ Overall length 440mm
+ Outside diameter at splines 27.5mm
The CV joint is retained in position on the splines by two circlips the inner one is approx 36mm from each end of the shaft and the outer is approx 5mm from each end.
+ The CV joints are 100mm diameter
Car is GTD, Fitted with Chevy 350, mated to Porsche G50/50.
Then most important of all where can I get one or am I going to have some made?
JBW