Hi all
i have a 302 that needs a rebore. The block is currently +30 thou overbored. Is it possible to bore it out to +60 thou without any problems? I intend to fit alloy pistons with a rev limit of 6,000 rpm (10:1 compresion). And another question, are standard rods from a 1976 motor with uprated ARP bolts ok for 6,000 rpm (approx. 350 bhp)?
i have a 302 that needs a rebore. The block is currently +30 thou overbored. Is it possible to bore it out to +60 thou without any problems? I intend to fit alloy pistons with a rev limit of 6,000 rpm (10:1 compresion). And another question, are standard rods from a 1976 motor with uprated ARP bolts ok for 6,000 rpm (approx. 350 bhp)?