GT40s.com - View Single Post

Ian Anderson · 01-15-06, 05:03 PM

The Dax radius arm? in the above photo can be seen as one of the big differences to oher 40's as they go almost straight forward and inside the side pod. (Tornado and GTD go inboard close to the engine.

The dust is from 15 years of build so far (previous builder 14 years and in my posession 1 year,

Seriously considering at this stage that I will link both tanks together in the engine bay (Say 1/2 inch across the bay) draw from 1 tank and return to the other - a damn slight easier than returning to the tank being drawn from.

Ian

01-15-06, 05:03 PM	#10 (permalink)
Ian Anderson IanAnderson Gold Supporter Join Date: Nov 2003 Location: Heathrow, London, UK GT40: Dax 40 Mk1 (Rover3.9EFi) Posts: 1,314 Rep Power: 18	Re: DAX Build Up The Dax radius arm? in the above photo can be seen as one of the big differences to oher 40's as they go almost straight forward and inside the side pod. (Tornado and GTD go inboard close to the engine. The dust is from 15 years of build so far (previous builder 14 years and in my posession 1 year, Seriously considering at this stage that I will link both tanks together in the engine bay (Say 1/2 inch across the bay) draw from 1 tank and return to the other - a damn slight easier than returning to the tank being drawn from. Ian