GT40s.com - View Single Post

Bill Musarra · 09-06-07, 07:22 AM

Lance,
You went with the Tilton setup as I did. Did you move the center console(or what is left of it) over? You kept the pedals at their standard width I am sure for you large feet(mine are 10s). I removed 3/4" from between them. I have reduced the console height from the shifter forward as it will allow the room needed for the gas pedal which will be angled similar to yours. To do that I bent the cooling pipes to lay flat along the floorboard.I would like to see the details of your gas pedal. My plans(in my head at present) are along the same as yours. Would like to see the layout a little better. If you have some pics of the construction phase I would like to see them as well.

Bill

09-06-07, 07:22 AM	#31 (permalink)
Bill Musarra wbmusarra 10 tenths Join Date: Oct 2001 Location: Snellville, Ga. GT40: DRB#5 Posts: 1,148 Rep Power: 20	Re: Lance's GT40 Australia Build Lance, You went with the Tilton setup as I did. Did you move the center console(or what is left of it) over? You kept the pedals at their standard width I am sure for you large feet(mine are 10s). I removed 3/4" from between them. I have reduced the console height from the shifter forward as it will allow the room needed for the gas pedal which will be angled similar to yours. To do that I bent the cooling pipes to lay flat along the floorboard.I would like to see the details of your gas pedal. My plans(in my head at present) are along the same as yours. Would like to see the layout a little better. If you have some pics of the construction phase I would like to see them as well. Bill __________________ DRB#5 351W/408 DIS TWM F. I. 930 Porsche LSD Last edited by wbmusarra; 09-06-07 at 07:31 AM.