MK-I MK-II MK-III MK-IV GULF MIRAGE J-CAR LOLA
   | Notices | Hi member,
welcome to GT40s.com! If you've never posted on the forum maybe give it a go by introducing yourself in the Introduce Yourself Here forum. Also, think about becoming a Forum Supporter at GT40s.com. Becoming a supporter will allow you more PM space, an avatar, and the money is used to keep GT40s.com running.
Enjoy the forum!
Welcome to the GT40s.com, the World’s Largest GT40 resource.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, view pictures, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, Join Our Community Today!
Why not start with your first post today and become an active part of GT40s.com now! And, if you find you enjoy GT40s.com think about becoming a Forum Supporter. | | GT40 Build Logs For build threads and build diaries only. | 
06-11-07, 10:27 PM
|
#141 (permalink)
| | ross henry Rookie 
Join Date: Jun 2007 Location: canada GT40: spf
Posts: 16
Rep Power: 2  | Re: 1st MDA to Canada
apologies, the rest of your build suddenly appeared and questions answered.great job | 
|  | |
06-17-07, 11:09 PM
|
#142 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 737
Rep Power: 12 | Re: 1st MDA to Canada
New MDA steering column support bar now completed, Pedal box assembly and brakes next.
Hello Ross, I'm just east of Oshawa - should you want a look, just let me know.
Chris
__________________ Chris Martino
Raceline Digital www.racelinedigital.com
1-888-857-1978
--------------
GT40 Mk I - Essex Wire #47 | |
| | |
08-07-07, 04:15 PM
|
#143 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 737
Rep Power: 12 | Re: 1st MDA to Canada
Finally had a chance to finish my pain in the rear, rear! Paint is done, re-assembly of the lights and louvre grills once the clearcoat is cured. Front black-out and fuel caps re-sprayed flat black. Also attached are some goodies I've purchased...
Chris
__________________ Chris Martino
Raceline Digital www.racelinedigital.com
1-888-857-1978
--------------
GT40 Mk I - Essex Wire #47 | |
| | |
08-07-07, 05:03 PM
|
#144 (permalink)
| | Bill D I Have No Life 
Join Date: Sep 2001 Location: Camarillo, CA
Posts: 2,381
Rep Power: 34 | Re: 1st MDA to Canada
Man Chris, that looks fantastic!! Please take a picture of the whole front end from a 45deg angle so we can see the stripe and the blacked out area.
Well done !!!
__________________
Bill D
RCR GT40 Mk1 Gulf | |
| | |
08-07-07, 06:35 PM
|
#145 (permalink)
| | ross henry Rookie
Join Date: Jun 2007 Location: canada GT40: spf
Posts: 16
Rep Power: 2 | Re: 1st MDA to Canada
Hi there Chris, I would love to come see.Are the weekends the best? She is looking good, you must be excited. Cheers, Ross | |
| | |
08-07-07, 08:49 PM
|
#146 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 737
Rep Power: 12 | Re: 1st MDA to Canada
Thanks Bill, it started raining heavily before I could snap anymore hence the garage shots - we'll do!
Hi Ross, just give me a heads-up, I can devote more time with you on the weekends so yes, just give me a call and I can make arrangements with you.
Chris
__________________ Chris Martino
Raceline Digital www.racelinedigital.com
1-888-857-1978
--------------
GT40 Mk I - Essex Wire #47 | |
| | |
08-15-07, 04:28 PM
|
#147 (permalink)
| | Martin Potts A Tenth 
Join Date: Jan 2007 Location: Hants, U.K GT40: MDA Mk1
Posts: 184
Rep Power: 3 | Re: 1st MDA to Canada
Hi Chris,
I love that twin light conversion, no small effort involved either. Lovely job though and very individual for a replica. I've not seen any other replicas with a twin light conversion. Something to be proud of.
Martin | |
| | |
08-15-07, 11:14 PM
|
#148 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 737
Rep Power: 12 | Re: 1st MDA to Canada
Thanks Martin, it took a lot longer than I thought it would but I'm in no rush (AKA haven't much time  ) and these kind of projects are a learning experience so slow and steady is how I got to the end - the MDA product is worthy of the extra time spent, that's my plug...
Now the front and rear ducts are next and I can then hopefully rid myself of the major bodywork/projects... ( I would like to actually drive this car in the near future!!!)
Cheers-
Chris
__________________ Chris Martino
Raceline Digital www.racelinedigital.com
1-888-857-1978
--------------
GT40 Mk I - Essex Wire #47 | |
| | |
09-14-07, 05:09 PM
|
#149 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 737
Rep Power: 12 | Re: 1st MDA to Canada
Richard,
Hopefully these help, let me know if you need anymore. The original holes were cut for the spot lamp and indicator supplied by MDA but since then I've changed many parts to original where possible. Everything needs a clean-up and I will probably put a small bead of sealant around the glass.
The L488's are shown before & after trimming the rubber boot and tossing out the chrome ring.
Chris
__________________ Chris Martino
Raceline Digital www.racelinedigital.com
1-888-857-1978
--------------
GT40 Mk I - Essex Wire #47 | |
| | |
11-03-07, 10:16 PM
|
#150 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 737
Rep Power: 12 | Re: 1st MDA to Canada
Well after many months of body mods, this is the first time since 2005 I have been able to take my build to a decent area for proper pics so I hope you enjoy them!
Cheers -- Chris
__________________ Chris Martino
Raceline Digital www.racelinedigital.com
1-888-857-1978
--------------
GT40 Mk I - Essex Wire #47
Last edited by ChrisMartino; 11-03-07 at 10:22 PM.
| |
| | |
11-05-07, 05:44 AM
|
#151 (permalink)
| | CraigB Bronze Supporter
Join Date: Jun 2006 Location: Lancs., UK GT40: MDA Mk.II
Posts: 143
Rep Power: 4 | Re: 1st MDA to Canada
Stunning Chris! Your attention to details has made a gem! I love those early sty'e rear lights.
__________________ Cheers
Craig
MDA Mk.II with 452ci FE and 930 transaxle in build
Build site at www.MDAmk2.com | |
| | |
11-05-07, 07:02 AM
|
#152 (permalink)
| | CESLAW 3 Tenths
Join Date: Oct 2006 Location: Illinois
Posts: 365
Rep Power: 5 | Re: 1st MDA to Canada
The Essex Wire paint scheme is impressive and your attention to authenticity is awesome. The juxtaposition of the old and the new really highlight your attention to faithfully reproducing the original. Really nice work.
Chuck | |
| | |
11-05-07, 09:51 AM
|
#153 (permalink)
| | Gold Supporter
Join Date: Jan 2002 Location: South Coast, En
Posts: 135
Rep Power: 8 | Re: 1st MDA to Canada
Hi Chris, I have to say what a great job you have done. The car is looking fantastic.
Its also good to see the car from a longer shot now you have the covers and windows in and the mods to the rear tail and lights done. It really has moved on since I saw it last year, Im very impressed.
Craig and others are correct, the attention to details is to your credit. I know the body work was well fitted and then painted last year, though now with the other parts fitted it looks near complete and very accurate.
I'll speak to you soon
Very best regards
Mark
__________________
Gulf Bond car, and a great pair of mark Two's! | |
| | |
11-05-07, 10:07 AM
|
#154 (permalink)
| | Bill D I Have No Life
Join Date: Sep 2001 Location: Camarillo, CA
Posts: 2,381
Rep Power: 34 | Re: 1st MDA to Canada
Incredible attention to authenticity! An old advertisement come to mind, "Is it real, or is it Memorex!"
Well done Chris!
Bill D
__________________
Bill D
RCR GT40 Mk1 Gulf | |
| | |
11-05-07, 01:37 PM
|
#155 (permalink)
| | FRPGUY 3 Tenths
Join Date: Jan 2006 GT40: Norwell, Mass. USA
Posts: 376
Rep Power: 6 | Re: 1st MDA to Canada
Chris, I can tell by the picture of the inside of the nose, that my brake ducts will not fit. The vertical panel is too close to the side of the bottom lights. The ducts have to be installed as you are installing the panels that go on each side of the radiator.
__________________
may no resin cure before it's time | |
| | |
11-05-07, 03:12 PM
|
#156 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 737
Rep Power: 12 | Re: 1st MDA to Canada
Thanks guys, I really appreciate your kind words, gives me more motivation to keep going! I'll be in touch Mark for more goodies to be ordered...
Bill, that's a bummer - but I'm happy you gave me a heads-up about it. Wish there was a way to do it. Will the the rear and front NACA ducts be OK? That would be the last of the body additions if possible. (where have I heard that before) 
Chris
__________________ Chris Martino
Raceline Digital www.racelinedigital.com
1-888-857-1978
--------------
GT40 Mk I - Essex Wire #47 | |
| | |
11-06-07, 06:41 AM
|
#157 (permalink)
| | FRPGUY 3 Tenths
Join Date: Jan 2006 GT40: Norwell, Mass. USA
Posts: 376
Rep Power: 6 | Re: 1st MDA to Canada
Chris, send me your shipping address again to datonabill at msn dot com and I'll try to make some ducts up in the next couple of weeks and send them to you to try the fit.
__________________
may no resin cure before it's time | |
| | |
12-11-07, 02:24 PM
|
#158 (permalink)
| | ChrisMartino 7 Tenths
Join Date: Nov 2003 Location: Toronto, Canada GT40: MDA Mk I
Posts: 737
Rep Power: 12 | Re: 1st MDA to Canada
Just received my duct work and seat shells from William Hough Composites. Bill cast moulds of the ducts that were in the nose of Chassis #1017 and ducts from the tail of chassis #1054. The moulds were cast just as the ducts were without improving them, apparently it was a lot of work to cut the ducts out and not screw them up! Installation work should be interesting-
The seat shells look great and will go for finishing over the winter.
Thanks Bill!
Chris | |
