hi i am in the process of fitting hydrolics on my tornado and does anybody know how much movement the clutch slave cylinder rod has on their car when the clutch pedal is fully depressed, i only have a small amount of movement approx 1/2 inch which i feel may not be enough to fully disengage the clutch drive plate from the pressure plate
i have used a .625 wilwood master cylinder 1/4 bore pipe full length and a renault 21 turbo clutch slave the car is running a 21 box and a standard 3 part 10inch clutch if i change the master cylinder for a larger bore say .7 of an inch will this increase or decrease my clutch rod movement
thanks in advance for anybodies help
chris
i have used a .625 wilwood master cylinder 1/4 bore pipe full length and a renault 21 turbo clutch slave the car is running a 21 box and a standard 3 part 10inch clutch if i change the master cylinder for a larger bore say .7 of an inch will this increase or decrease my clutch rod movement
thanks in advance for anybodies help
chris