Here\'s My Engine Plan. Comments
As I grow close to ordering my kit, I have spent the last few days laying out the engine build. Here is what I've come up with and would like to hear from those that have been down this path before.
Ford Racing aluminum block, 8.20 deck
Scat 3.25 stroker crank, 5.400 rods and 10:1 forged pistons
AFR 185 heads (2.02 intake, 1.60 exh)
Crane Cams hydraulic roller (.595/.595 lift, 236/248º dur @ .050 lift)
Electromotive direct fire distributorless ignition system
48 IDA Webre carbs
3-stage dry sump oiling system (mfr TBD)
On the dry sump system, I'm not sure if there is sufficient room with the alternator and A/C compressor.
All feedback welcomed and appreciated.
Bill D
Los Angeles, CA
As I grow close to ordering my kit, I have spent the last few days laying out the engine build. Here is what I've come up with and would like to hear from those that have been down this path before.
Ford Racing aluminum block, 8.20 deck
Scat 3.25 stroker crank, 5.400 rods and 10:1 forged pistons
AFR 185 heads (2.02 intake, 1.60 exh)
Crane Cams hydraulic roller (.595/.595 lift, 236/248º dur @ .050 lift)
Electromotive direct fire distributorless ignition system
48 IDA Webre carbs
3-stage dry sump oiling system (mfr TBD)
On the dry sump system, I'm not sure if there is sufficient room with the alternator and A/C compressor.
All feedback welcomed and appreciated.
Bill D
Los Angeles, CA