While I've got car pulled apart to fix grounding issues and broken throttle cable, figured I'd try to fix all the current needs. Couple of quick questions I couldn't seem to find in other threads or manuals:
- up front, which cap is for brake fluid res and which cap is for clutch fluid res
- the rear half shaft boots are shot ... after getting bolts out, removal of shaft from ZF is no problem, however, removal from wheel assembly is not happening ... seems to me I remember Dennis O saying to take a wooden block and then smack it real hard with sledge hammer to break the outside half shaft loose ... any other ideas
- which boots do folks use to replace rear half shaft boots? seems to me larger boots are required (at least for my setup) due to the angle of the half shaft to the ZF
Thanx much
Mark
- up front, which cap is for brake fluid res and which cap is for clutch fluid res
- the rear half shaft boots are shot ... after getting bolts out, removal of shaft from ZF is no problem, however, removal from wheel assembly is not happening ... seems to me I remember Dennis O saying to take a wooden block and then smack it real hard with sledge hammer to break the outside half shaft loose ... any other ideas
- which boots do folks use to replace rear half shaft boots? seems to me larger boots are required (at least for my setup) due to the angle of the half shaft to the ZF
Thanx much
Mark