Leon
It`s the 16th and 17th of July at the ASB showgrounds in Epsom, SPEEDSHOW. I think the Friday may be a trade day.
Yes it was good to put a face to the name thanks, after seeing your wing I have been hard out making mine. I could not get anyone to roll such a tight leading edge so with a bit of kiwi I made a jig using some timber, formed a `trench` 34mm wide and 50mm deep. I then laid a pre cut strip of ally on top, got a real clean piece of pipe and a piece of 150mm x 50mm timber as a strong back and inserted in into my hyd press, worked it backwards and forwards and hey presto, perfectly formed leading edge. I have some wing `ribs` and alloy rib mounts being cut at the moment which will bolt directly onto my uprights, my sheet metal man (Graham Berry Jnr) rolled me the top and bottom so it will be just a case of pop riveting it together in a couple of days.
Cheers
Russell