I am new to this forum and i see a lot of interest in converting the 944 transaxle to mid engine. I have come up with a solution to the problem.I am in the process of completing this.I will explain how i do it. I am adapting an LS engine to the 944 using the stock flywheel and starter along with a 10.5" clutch good for 500 hp.I make an collar that allows you to use a hydraulic bearing and a special pilot bearing so you don't have to machine down the input shaft or take the transmission apart. This process is a complete bolt in operation which means if you have to replace the transaxle you don't have to machine anything.Thank you for your interest. Gary