No Rod, at this point I'm only going to do the McLaren wheels. I'm doing 2 different methods 1) a complete 1 piece cast wheel 2) alloy cast centre with a steel barrel. There isn't a huge difference in weight but there is a huge difference in cost.
A quick note, I will be offering 4, 5 and 6 pin drive axles, any PCD made from 7000 series Alloy for the front and rear. The rears will have The drive flange splined on and can be from 108mm to 127mm CV compatible. With 2.5" single nut.
Cheers Leon