I have a small block Ford stroked to 331
AFR 185 heads
Comp 282S cam 236/236 @.050 .528/.528 lift 110 lobe seperation
Weber IDA's
60 idle jet
1.10 holders
f5 emulsion tubes
155 Mains
190 Airs
37mm chokes
idle screws 3/4 turn out
Fuel pressure at 2.5lbs
Plugs are black set up is running rich. In the process of switching the chokes to 40mm.
I see a lot of 331 small blocks on the site running Weber IDA's. Any one care to share their Weber jetting set up?
AFR 185 heads
Comp 282S cam 236/236 @.050 .528/.528 lift 110 lobe seperation
Weber IDA's
60 idle jet
1.10 holders
f5 emulsion tubes
155 Mains
190 Airs
37mm chokes
idle screws 3/4 turn out
Fuel pressure at 2.5lbs
Plugs are black set up is running rich. In the process of switching the chokes to 40mm.
I see a lot of 331 small blocks on the site running Weber IDA's. Any one care to share their Weber jetting set up?