Recent content by Henry

Hello Dimi I wonder if I could get some information for you about what mechanisms you used in the mirrors I also have a drb and it came with the mirrors half assembled I'm just trying to finish the car off and need to sort out the mirrors

Made a housing to go under the rear vent to hold the air filter so it won’t pick up hot air from the engine Also got a single outlet radiator nostril just because I like the look more I’ve tried to keep the engine bay less cluttered as possible, made up carbon fibre covers for the fuel...

Well it’s been waaay to long since I’ve been on here so a quick update I got the sump all welded up and ready to fit but didn’t like it because it was to heavy so scraped it and made it out of aluminium and it fits and holds 7 Lts of oil Got tyres for the wheels and there fitted could have...

also bnc make the clevis,s for the rear suspension. and there is a bolt place in oxenford on the eastern side of the motorway that supply's all the bolts for drb (sorry i can't remember the name) and have them a bit cheaper, and try Paul from rage racing in nerang he makes the sway bar bits and...

Hi bob ive done the same thing to my drb gt40 if you want an engine adapter try BNC products Chris Hatfield on 0418 731 528 he has the plates but you will need to grind away some of the backing plate to clear the rear crank sensor also i needed to move the engine mounts back 20mm on the chassis...

I would be interested, are they going to be cross over?

bit of a long shot but does anyone have a pick up for a rear sump 1uz and a oil level sensor?

I made my own to fit inside the horn button

As promised here are the pictures of the sump pick up sorry there are no development pic's I just wanted to get it done

Jim I hear what you are saying about the oil serge, but the girl friend is pitting the hard word on me to get out of the Isa but before I can do that I want/ have to finish some of the many projects that I've got going main one being the house started with a 3.6 meter renovation and has turned...

Hi Mark the tail lights are a Britax unit part number L14.00 they are a universal light for a truck and or trailer but they fit perfectly as they are 140mm round

So I've run into a bit of a problem, once I moved the engine down and forward to make it fit now I cant get a sump that will fit canton do one that's close a front sump that is 5 inches deep, and muldoon do one that is 4 1/2 inches deep but it's a rear sump this is all well and good for a cobra...

The horn button was my design I originally brought the standard looking one but looked too big for the steering wheel so of down to a local machine shop, told them what I wanted and this is the end result still looks like the same stile as back in the sixty’s but with a modern twist and that is...

More pictures inner door handles, pedal assembly and on a side note the trip up to Isa

Also my wheels arrived Foose Knuckle 18x8 and 18x12 got to love the wide body.