nvoort's latest activity

Got the same ones for my build too but haven’t mounted them yet so thanks for the insight and feedback for my future installation! Devin

This picture better shows the black cover that I removed from both units. The wire grommet for the wires to passthrough easily popped...

Finally finished the radiator hoses. We just went to the local autoparts store and looked around their in stock selection for radiator...

Hey Randy, I am investigating this now as well. TBD on if high speed bypass vents are necessary for this application.

There was some recent discussion regarding shrouds here: Post in thread 'GT40 - Radiator Fan Shroud'...

Next up was the fuel filler tubes and caps! We took heavy inspiration here from Sean's build and used 2" stainless. (aluminum is out bc...

We finished mounting the radiator fans which is exciting. We mounted them using a fan shroud we built with some scrap aluminum sheeting...

There was one final coolant line that needed built that connects the bottom of the expansion tank to the return coolant tube. The...

keep us updated!

That looks exactly like the Moroso one I bought for half the price :rolleyes: Looks like they just stamped their logo on it.

They might be these Wagner sealed beam multi purpose units. https://a.co/d/3tdoxUD Thx much. That is a good looking tank. Going to buy one.

Sorry I should have also read it a little closer. For some reason the space above my already positioned turn signals was smaller than I...

These might be the lights you are looking for on Amazon 5"x 1.75" part # 4-FL-0660-SW-3 for $45pr also on Ebay $35pr they are available...

Welcome!! I am neck deep in an RCR40 just outside Columbus! Check out my build thread to see where I am at and let me know if you have...

Hello Everyone. Greetings from central Ohio (Granville). I am about two weeks from kicking off my next build, an RCR GT40, and am super...