Recent content by zensation

sure if you feel like driving up 95 75 minutes to see one lol

Howdy I'm in st Augustine I have one that Ive been building for a couple years. Lots of work done and I've driven it around a couple times if you wanna see it. Just lmk

Long over due update incoming!! I have reached the coveted Go-cart stage! Ill post a link to the youtube video below. When i started the car up kids from all over the neighborhood came running to check out the commotion lol. in short it feels awesome to drive. Mechanicals: I dont know if i...

Thanks Hector, they are Braum Orue seats. The seam to fit beautifully without any modification. Ill be doing another update in a few minutes with a ton more pictures because i havnt updated this build thread in a while.

the other thing im going to be doing is making a an 8 channel IO inverter for the Raptor pro system to make it seemlessly function with the infinity box system. The infinity box requires gound signal inputs to the master cell while the raptor system sends 5v or 12v outputs. I designed the...

A few updates this week. I was able to get in my digital dash and begin bench programming on the as indicated in my previous post and ive attached a few more pictures of that....... But the big update revolves around my dash. I was able to find a Koenigsegg dash out of one of the movie...

I wanted to update this thread with some info for those looking to use a purely digital dash and getting all sensor data from the GM ECM. Specifically an e67 ecm. for wiring simplicity reasons I am using a completely digital dash on my build, but one thing i ran into was getting the fuel...

I'm using purely for VSS for the ECU to send the speed to gauges, and potentially for the Epas system. 5 pickups just won't be enough resolution for something like ABS or traction control which is where a tone ring would shine. For VSS I just have a problem with using a drive axle in general...

Starting to plan out my vehicle speed sensor solution and as Im coming off a couple of projects with my custom vehicle electronics business, i just had a very relevant project cross my desk. For some backgrounds I develop circuitry for converting signals, processing, and modding automotive...

Custom headers came in yesterday. I had these made for a turbo application and they will make it extremely easy to rout the exhaust straight out the back! Then later I can replace my muffler section with 2 top mount turbos.

Once again in most states that is not the case. It sounds like in your case your state has mandated something and you are assuming it's that way everywhere. If my state required it I would certainly do things differently. I don't really want to argue about it anymore. This works and that's...

After doing the fronts which took about 12 feet of the braided I had leftover, there wasn't enough left to run to the back. Advance had copper in stock so it was easier. 0 concerns of the famous internet timer of expansion, given the material expansion rates which I can find tabulated in my...

Thanks for keeping up on my build

and some other plumbing pics

I reached my first milestone this week, plumbing complete! Clutch bled, brakes bled, fuel lines, oil lines, coolant lines, hvac and heater lines. I hard lined what i could and used an fittings on everything. feels really good. the other thing i've been working on is tracking a leak from...