Search results

Re: Rf80 Reborn!!!! Ever wonder what it takes to match balance a RF flywheel to a 50oz SBF? Since my motor was a 50oz external balanced SBF and I was not going to tear it down to go internal, i needed to get the flywheel match balanced.

Re: Rf80 Reborn!!!! One of the things that really distract from the pleasure of driving the car was the 016/5N. The gearing was just a pain in the A** when driving on the street. When used on track days it ws not that bad especially with the peaky motor that did not get out of bed till almost...

Re: Rf80 Reborn!!!! Here are a couple of shots showing the CDI that has to be removed.

Re: Rf80 Reborn!!!! Heres a couple shots of the motor. Some of the biggest problems have been concerned with changing the wireing back to a distributerless setup. Rolf had decided to run a distributer with his setup and use that as the source for his Crank and Ref signal. In doing that changes...

Last August I purchased Rolf's car for what turned out to be a great deal but even then I new that a new begining was going to come. I spent some time driving the car and deciding what needed to be done to make it into my car not Rolf's. I wanted the car to be set up to my tast and my driving...

Fran, I noticed but since it did not say RCR904 I figured you would handle it in your own way. I would hope we can talk specifics at Carlisle this year. Peter

Group Hug!!!!!

Lynn, As to the layout of the diff and tranny in Vette you are correct but as to the Porsche, the transaxel layout is the same as with the 016 and 01E. The 016 being used in the 924 through 944 Turbo and being replaced with the 01E in the 968. This setup would work for a V8 powered front engine...

Bill, You were right on the money, I purchased two of the coil packs today. Thanks Peter

Charlie, I have an update, using the Motorcraft Part # I was able to find the following web site http://www.fordpowerproducts.com/pdf/Wiring_Pigtails_Illustration_Guide.pdf The great thing about the site is that in it's 115 pages it shows every Ford connector ever made. When I looked up...

Charlie, May you live long and have all your GT40 dreams come true. Peter

John, Since this would be a retrofit i would suggest the method that RF used. The A/C line were run down the inside of the chassie along the interior side between the seat and the wall. a panel was attached that covered and protected the line. The main wireing harness was also run down this...

I'm trying to find a source for the two flat 4 post coil packs used in the Motec installation on the RF. Thanks in advance for any help. Peter

Can any one tell me the part number from Ford, or a source for the Male plug that mates with the three prong connector on the Explorer Cam reference unit. Thanks Peter

Simon, You are being kind with the no need to redo anything comment but I'll let it stand. Anyway I'm glad you made it home without problem and am looking foward to the new build thread on #90. By the way, with all the loading we missed one box that contained the water hoses and some A/C...

The car is heading for the Lone Star state but I will let the new owner announce himself if he so desires. As for me I now need to change my signiture to reflect only one car and the one car is now not running. Having pulled the motor I have plans to do quite a bit of refitting to Chassie...

The car is heading for the Lone Star state but I will let the new owner announce himself if he so desires. As for me I now need to change my signiture to reflect only one car and the one car is now not running. Having pulled the motor I have plans to do quite a bit of refitting to Chassie...

The car is heading for the Lone Star state but I will let the new owner announce himself if he so desires. As for me I now need to change my signiture to reflect only one car and the one car is now not running. Having pulled the motor I have plans to do quite a bit of refitting to Chassie...

Sold!!!!

Lynn and Veek No, the show is not open to the public you must be part of the industry but give me a call on Monday. 954-816-6005 Peter