Search results

  1. C

    302 teardown and rebuild UK

    Those '69 heads are the main impediment to achieving your horsepower goal and although money/labour can fix that, perhaps it would be better to start from a better place, the obvious choice being an aly head such as the AFR 165. If you want to stay with iron heads then there are some better Ford...
  2. C

    2.0 Litre V6 Dino Engine - Transaxle Ideas ?

    I think that one (at racecars.com) might be 4 speed and you will definitely want the 5 speed whether ld200 or Mk9 . At 70 odd lbs they are both in keeping with the light weight of the 206.
  3. C

    2.0 Litre V6 Dino Engine - Transaxle Ideas ?

    Or this: https://racecarsdirect.com/Advert/Details/116615/hewland-ld200-gearbox-2750
  4. C

    2.0 Litre V6 Dino Engine - Transaxle Ideas ?

    How about this? http://eliteracingtransmissions.com/categories/transaxle-gearboxes-sub-menu/smt-8610/
  5. C

    Source for pre 1975 302 blocks

    Yes, they came out of an endurance spec engine.
  6. C

    Source for pre 1975 302 blocks

    For future information here is a pic of (from left) Mexican, std and HiPo main caps.
  7. C

    907/8 First serious outing

    When I visited Charade some 35 years ago the circuit was crossed by public roads and you could simply turn onto the track and set off for a lap or two - is that still the case?
  8. C

    Mirage Wheels?

    Arghh- made my post redundant.
  9. C

    Mirage Wheels?

    They look to have Cobra 2 casting mark which means they are Trigo/Vintage wheel repros.
  10. C

    Keith D and Daughters MK11 Scratch Build log

    Have a look at Palatov.com. There's a lot of useful stuff on FEA and CFD software at the more amateur end of the cost scale. It's in the blog section.
  11. C

    Classic Car Developments Chassis #5 - Doc Watson's car

    There's a sheap set of pre '66 289 heads on ebay.uk at the moment. Scott Drake have a repro of the early timing cover where the pump has no backplate.
  12. C

    Original GT patern upright replacements needed.

    https://www.ndt-consultants.co.uk/ndt-services/motorsport-inspection-services/
  13. C

    Original GT patern upright replacements needed.

    Worth NDT testing the ones you have as the cost of replacement is very high. At least then you will know if you have some new wall art or not.
  14. C

    Which engine for my MK IV project?

    Try https://lykinsmotorsports.com/ an fe specialist in the USA
  15. C

    Hello! and Ferrari 512M project

    Here is a link to a YouTube channel featuring a build with a 360 engine, although front engined rather than mid.
  16. C

    ATK Engines.

    Check the manifold fit all round in a dry assembly. You can use the cork end seals to get the height correct ( then throw them away and use silicone rtv). I've had an new Edelbrock manifold that was a problem fit in the past so a problem there is not unheard of.
  17. C

    ATK Engines.

    I suspect that you have a leak at the intake/head interface that is allowing water to be drawn into the plenum area of the intake manifold itself; this would explain the presence of water in all the bores. Replace the intake gaskets and refit the intake. To make sure it's leak free you can...
  18. C

    2019 Formula 1

    The change from 13" to 18"dia wheels is a really big one that barely gets a mention in that vid. F1 has been using high sidewall slick tyres since the early '70s and, cosmetically, they have contributed a lot to how we think an F1 car should look. Formula E cars look strange to me with those...
  19. C

    GT40 replica prices

    Abbey panels according to auction blurb
  20. C

    ford 289 hp

    For all sbf info :http://www.fordsmallblock.com/
Back
Top