Search results

Couple more questions: 1- I would like to buy a new set of door lock cylinders. What year of Mazda Miata do the door locks belong to? 2- The SLC Wiki site suggests using helper springs for the front shocks. I have the RCR supplied ramlift hydraulic system for the front shocks. Are the helper...

The first picture shows the interior roof panel. It has a groove at the end that corresponds to the tongue on the spider. If installed that way, wouldn't it interfere with the windshield install? Am I supposed to cut that groove away so it will allow the windshield to sit flush on the spider...

Had to take a little break from the SLC, but now I'm ready for round 2. First pic is of the mounted oil cooler (Setrab 920), and the expansion tank (Moroso 63651). I plan on fabricating a flexable shroud to mate with the side port in the future. Next pic is of the ARE dry sump tank and in front...

Got myself in a real jam, hoping to find some help. I have an LS7 wet sump engine. I bought a dry sump system from ARE. The pan is a 1005m. As you can see from the first picture, the AN fitting is too close to the AC pulley. I am considering using the setup as seen in the second picture. I...

Next task is figuring out the best dry sump system for the LS7. I am looking for a system that will have an external pump so I can add a couple scavenge lines to the oil pan. I will be mounting the A\C compressor just below the thermostat housing so I am looking for a pump that will drive off...

Finished pedal assembly. I know this angle looks funky but I played with a lot of different configurations and this is the one that gave the most pedal travel and still get full throttle.

I decided to not use the A\C plenum. Instead i bought a splitter from Vintage Air and epoxied it the the manifold on the evaporator. This way the hoses exit the evaporator and go straight to the vents. Since one hose travels a much longer distance I fabricated an adjustable valve system from...

Allan, thanks for the clue. I found the wire. I had it wrapped up tight so it wouldn't be in the way while I was working. Cam, I bought the flat black CF10 wheels. Also, the race tail. My theme is stealth so everything exterior will be black.

I received my SLC back in June. Just working on the basics so far. First of all I want to say thanks to all the people who post in this forum. I would be totally lost without your guidance. This is my first build of any kind. My plans include: LS7 (620 HP), Ricardo, black paint, black wheels...