Search results

Its all about the heat load/time your are trying to regulate. This is best expressed as total BTU's in a given length of time. Ill expand on this in the following manner. We have two cool guys and their cool GT40s. Both have the same engine and the same remaining powertrain so they potentially...

I have no idea if they make any noise. My engine is however. There are several sources for these type of fans. Some are very expensive and others are much less so. The cheap ones will work as a test on a track car. Once you know they work for you and they life out, you can decide if you want to...

Take the needle seats out of the carb and inspect the o rings. Fuel can bypass the needle seat if they are hard and flat. They get like this after about 6 months of non use. This happens ALL THE TIME to seldom driven Holley type carbs. You can buy them by the bag full like I do and replace them...

The story of the Indy V8

Mount these where they fit best, inline with the hoses, and recieve cool air that is not injesting road swarf. Turn them on when you go out onto the track and off when you return to the pits. They are not the most expensive option and don't last forever but do work, especially after corner exit...

Question #1. What do you intend to use the car for and what do you have now for brakes/tires/pads? ya........ thats twoish....... Streetcar with streetcar tires and brake pads? You dont need to cool the rear brakes unless you are driving completely crazy on the street where it is impossible to...

Heat hun? See, ya learn something every day.

Now THAT sounds good! REAL good.........

This is very good stuff, Warning! if you use this you will never get the two pieces apart without distructon..........of one or both pannels! https://itwperformancepolymers.com/wp-content/uploads/Plexus-MA832-TDS-.pdf...

Thank you!

Ya, you could sell those as a set. Two options. Fiberglass or CF.

Is this what you have? Did it come with the engine, and is the flywheel also a neutral-balanced flywheel? Did the engine builder supply the damper and flywheel and balance the rotating assembly together...

I have wondered what happened to your car. It's good to know she had a good go with someone who enjoyed it. It looks like there is plenty of life in it for the next chapter. I hope it ends up at a track near me. Maybe if you find out who buys it, you could let us all know what happens to it...

here: https://bringatrailer.com/listing/rcr-t70-mk-ii-spyder/

I have a Renault R21 with the 1-piece input shaft, better ratio 1st and 2nd gears, and a Quaife TBD. I'm going to take it out and install a Porsche G50 with custom gears and Quaife TBD.

Most current flyover, 100% of the commercial area cleaned up. Ocean side of Front Street will not be rebuilt...... well maybe........

A little more.

I think it is good for the soul to remember the good times..............

Here's a taste..........................

Here's another webpage with lots of cool memories. Some of my favorites are of Halloween. If you never went on Halloween.....................well, you missed the best party on planet earth. https://lahainatown.com/