Search results

I've got the Kenlowe two stage fans that do suck a lot of amps - I only run them on the slower speed cable and that is more than enough to keep temps in check. They are on a separate large style 40A fuse with pretty heavy cable. I use one of these to power them and it means I never really notice...

Fit it - you'll have to fit a heater matrix and vents for the IVA anyway. Cheapest option is from the states and they'll send everything you need including hoses cut to length if you give them measurements. I think mine was about £400+ shipping but that was 8 years ago or so.

Ricciardo to partner Vettel at Red Bull in 2014 Formula 1® - The Official F1® Website

Hang in there Keef.

I've got a wooden one - 3rd pic down. The GT40 Enthusiasts Club Shop

A few GTD's were fitted with the ac radiator in the rear - needless to say it wasn't too efficient being near the headers and also not much airflow. Most guys that had that setup have moved the rad to the front of the car now.

Ian I-Player only works if you have a UK I.P. Address - the servers check to see where you are before allowing access. However there are sites setup around the world that bounce your ip address so you appear to be in the uk - a bit of searching should show some info.

Hi Abraham, welcome to the forum - lots of cars in and around London. Whereabouts are you located?

Tidy that.

There is a facebook page for the enthusiasts cub.

Giant Penis Shuts Down The Nürburgring

To solve the leakage out of the centre of the adaptor, I cut an alluminium disc of thin sheet to fit inside, it has to sit a few millimetres off the differential splines. I wasn't keen on having them welded in so used chemical metal to hold them in place. This purely creates a barrier between...

I'm booked ;-)

Andy @ Tornado Sports Cars has done this so may chime in with info.

Agreed - please change the title of this thread, had me going for a moment too.

I've removed stubborn bearings before by putting a weld all the way around the inside of the bearing face - when it cools it shrinks and usually it will just push out. there are a few youtube video's of doing it - here's the first I found.... Part 2 Steering Stem Race Removal-Welding.AVI -...

Not sure if your heads have the emissions take offs on them like the edel-brock performers do - might be worth checking if there are the threaded plugs in the ends of the heads and they are tight.

Cracked/Leaky header pipes sound like a loose tappet.

Yep same for me - also on a mac.

I wonder if rather than Massa having gearbox seal problems, he may have a tangle with Vettel.....