Search results

Just curious what you heard of the SLC quality. My personal experience has been exemplary for parts and tech support.

Joel I didn't think of that. I think you are correct. Thanks

Try to get that cabinet to seal as best as possible. If you using glass bead it makes the floor like ice.

Yes I know that. I was thinking before I put a magnet on it that it was either 304 or 316 stainless. Just want to be as accurate as possible.

Very Nice!

I will be putting a Nine Lives Racing wing on my SLC. I plan on adding a mount to the rear clam 90 degree hinges after I reinforce the welds. They are made from 1/4 plate and are the perfect width for this application. My question is what are they made from. The superlite parts catalog list them...

Come on Neil the whole car is dangerous. This is about boys and their toys. I personally love the range of innovation that individual builders incorporate into their personal builds. My car is very basic and its a blast to drive. That being said If I could afford the time and money to do a top...

I'm still perplexed how the stock parking brake system doesn't work for a lot of the builders here. I did install the superlite e brake calipers with an e stopp actuator. The only thing I had to do was to remove the release spring from the supplied cables as they limited the cable pull. So yes...

Neil you missed your calling as a Color Commentator. I think ESPN can still use you:rolleyes:

Looks nice. Kind of validates the opening for the intake.

Ahhhhh the old my steering wheel is off center debate. Just for sh..ts and giggles check out a few of the cars you either drive or have access to. You will most likely find a lot of steering wheels off center from the seat. As a matter of fact there are hundreds of thousands of them driving...

On my SLC I used a 1 1/2 inch flat bar 1/8 thick with 5/16 floating nut plates attached that is slipped in from the rear wheel well area on top of the body lower lip which was sitting on top of the chassis tub. I then bolted each side with 4 stainless steel 5/16 bolts through a thin stainless...

P.S. I think the clamp on the exhaust is going to melt!:cool:

Your friend has a friend who is a very good photographer! ;)

Add me at The Poconos in Pennsylvania (Northeast Pa.)

Good idea. I noticed this motor is mounted off to the left, is it a 90 degree operation?

I mounted my adjustable pedals using 3/8 flatheads with a 6x12 3/16 stainless steel plate under the chassis. I drilled lightening holes in the stainless plate. Your concern about the nuts hanging off is very valid as the bolt threads have bottomed out at times. At first I was concerned but then...

It sounds like your describing an automatic with paddle shifters. If so that's different from a true sequential trans (like a motorcycle ). Or was it a paddle shift with a dual clutch. I've driven r8's and an F430 with a dual clutch and they are awesome almost made me feel guilty preferring a...

My car has a Porsche G96 6 speed manual. What would the difference be?

Why would being sequential be a turn off for the street?