Search results

I think there is a rule against PORNOGRAPHY on this site!!!!

Oh the confusion of compression ratio and super/turbocharging. The ultimate goal is how much fuel and air is in the cylinder at time of detonation. A top fuel dragster runs approx 6.5 to 1 compression ratio with ALOT of boost. Hence a relatively large combustion chamber with a heck of a lot of...

Remember you'll need a transaxle that can handle the torque.

Curious to know if anyone is using puck style bump stops on their shocks to limit bottoming out. The roads in northeast Pennsylvania are third world quality at best. I upgraded the rear spings to 850 lbs and didn't want to go any stiffer. I'm at 4" frt and 4.5" rear ride heights. So far my...

CONGRATS TO YOUR FAMILY! Building the SLC is a great accomplishment but I'm sure you know you'll never be more proud than of your family's accomplishments. That being said wait until that random stranger refuses to believe that you built your car. My wife took my iPhone to the shop for a new...

Congrats! We obviously will need pics of your build!

Or where to get a lexan Windsheild?

I swapped the links today in different combinations.I have 5 sixteenth washers stacked on the bottom of the long link. Ended up with about 0.2 degrees less angle on the tow arm than the upper control arm with zero toe at 4.5 inched rear tire height. I was limited on how much I was able to...

Thanks Howard. I’ll be busy this weekend. It is interesting that a inch or so could affect the bump steer so much. But I’m confident there is sound engineering applied with the design based upon the excellent overall package the SLC is as well as the other products RCR produces.

I received advise from a gentleman that’s intimately involved with the development and manufacturing of the SLC. I was advised that the spacers that are held in double shear arrangement for the rear toe links may be installed incorrectly. Sure enough I have to larger spacer at the top and the...

I’ll drop the pressures and try it.

Everything is tight with no wear on any heim or hub. Checked tires 35 psi tread clean and within 1/8 inch circumference. Alignment is good. Leaning towards what Randy said. It feels like it’s clawing for traction side to side, but there is no noticeable wheel spin. Talking about surfaces I...

It only happens on hard accel. It only happened once or twice before it was tuned because I was breaking in the engine and didn’t use full throttle.

P.S. Its not a vibration like a bad axle,tire etc. The car physically jumps side to side

Got the car Dyno tuned yesterday and was finally able to do some hard pulls on the road. At about 50- 60mph under full throttle the car develops a SEVERE side to side wobble from the rear. It is an open G96-01 transaxle. I checked the rear toe and its about 1/64 toe in. Everything is tight and...

You should be reported for CARPORN! And commended at the same time.

Neil you are a national treasure of useful AND useless information. :p

So glad to hear you are well! Enjoyed reading through all your progress. Cant wait to see your completed first drive. As long as you can remember where reverse is!:p

Hmmmm I remember when someone put a truck motor in a Viper.

Recent car show in Northeast Pa