Search results

  1. R

    Michael's GT-R Build

    Nice work Mike;)
  2. R

    Steve's GT-R Build Thread

    good progress;)
  3. R

    Michael's GT-R Build

    Mike The two six pin connectors behind the heads are for the O2 sensors that will go in your exhaust. The connectors that are in between the heads are for the stock Coyote intake that control the intake flappers. These connectors are not used and should be wrapped up with electrical tape.
  4. R

    Michael's GT-R Build

    Mine are Landrum 600 LB 4" tall
  5. R

    Steve's GT-R Build Thread

    Kurtiss' GT-R build log page 7, he has a nice set of drawings (PDF)that identify many of the pin outs. The drawings are for the Infinity box but the pin outs are the same. I have used these drawings a lot and they work perfect for the steering column connections.
  6. R

    Michael's GT-R Build

    You ran yours just like I did. I think the angle is better than the 90 degree pattern. The angle should help with filling the tank. Don't forget to put the check valve in the filler pipe some where as the fuel will go up and out under hard braking. I bought a 1-1/2" surge protector from...
  7. R

    Michael's GT-R Build

    Good job. Exactly what I did.
  8. R

    Michael's GT-R Build

    Way to go Mike
  9. R

    Michael's GT-R Build

    Probably at this point it would be easiest to change the to a ball end. Mine came with a pin with a keeper on top and the hiem joint slipped over it .
  10. R

    Michael's GT-R Build

    The arm that cam with the car is adjustable in length. At least mine was.
  11. R

    Michael's GT-R Build

    Mike--I raised the front of the spider with 1" spacers. There are three spacers one on both sides and on in the middle.This was to get the windshield to fit better and allowed more room for the wiper. My dash is in so I can't give you a picture from the inside. Before you anchor down the...
  12. R

    Michael's GT-R Build

    Do you mean the spider?
  13. R

    Rufus GT-R

    First start of the Aluminator 5.2 XS Don't know how to post the video--any help?
  14. R

    Rufus GT-R

    Dash is installed and connected up. Next thing is to start the engine.
  15. R

    Michael's GT-R Build

    Keep at it, you are doing great!!!
  16. R

    GT-R Door Cards

    Thanks for the Road Map (instructions) door card installation. Can't wait to start on installing mine!
  17. R

    Rufus GT-R

    Here is another option on the hinges--Prime Line P/N 3628 on Amazon
  18. R

    Rufus GT-R

    Home Depot 12 in. Stainless Steel, 4-Bar Hinge Casement or Projecting Window
  19. R

    Rufus GT-R

    Working on the rear clam hinges that I got from H. Will post pictures later as the ones I took are somehow lost.
  20. R

    Rufus GT-R

    Had to relocate the fuel fill since the hood will open. Relocated to the passenger side so I can get out of the car when parked at a fuel pump. I will use the Sparko fill that came with the kit. Machined two reducers from 2" to 1-1/2: and welded them in to the fuel fill and a line to the...
Back
Top