Search results

And America doesnt try to change the way other countries think. Grow up, Travel the world and just listen to the way America tries to change other countries. America is one of the Bully countries that has to have other countries jumping to their way. I am not trying to change your...

The right to bear arms is about as outdated as last century. 9000 were killed in the USA by guns last year. Many more than died in the 911 terrorist attacks. Look at all the extra securety that has been put in place because of these attacks. If a terrorist took out a bus load of 1st graders...

And the Sun bitching and moaning. This from the group of buzzards that had a hand in killing Lady Di. Maybe it is about time the press got it back into their heads that they are there to Report the news NOT make it.

Yes but it is a Hot Rod. Anyone can modify a car and make it go fast. The Bugatti is still the fastest un modified production car.

When it sounds like a Rotary, that will be the Pitlane speed limiter engaged, this often operates by killing any number of sparks to keep the revs at the preset. I think it is a cross plane crank but due to the exhaust system it is harder to tell these days.

Austrailian built cars. Ford Falcon, and Holden Commodore's. The holden is sold in Europe/Britan as a Vaxhaul XXX and will be being sold in the USA as the top of the line chevy next year. Both these cars are powered by pushrod boat anchor V8's. Very clever exhausts make them sound semi...

Scotsman's Chilli. A hungry but penniless bloke walks into a seedy cafe in Glasgow. He sits at the counter and notices Jock with his arms folded staring blankly at a bowl of chilli. After fifteen minutes of just sitting there staring at it, the...

as a rough guide I work on for metric threads is to take the pitch away from the OD to give a tapping size. The thread angle is 60^o. The thread depth is 0.614 x pitch so for a 1mm pitch thread you are looking at a depth of thread of aproximatly 0.024"

The great thing about threads is you can make them any size you want if you are making both parts. On a thin wall part I would probably use a UN form at 24TPI. Standard form carbide tips are available for both internal and external on this form. I am guessing you are making both the male and...

I have holidayed a couple of times in Tasmania, Comming from NZ where there are plenty of caravans and I towed one for many years. I would not even concider getting a van in Aus unless there was an extrordinary reason. I have found plenty of B&Bs or cabins to stay in. Plus traveling without a...

Job at the FBI The FBI had an opening for an assassin. After all the background checks, interviews and testing were done, there were 3 finalists; Two men and a woman. For the final test, the FBI agents took one of the men to a large metal door and handed him a gun. 'We...

One thing you need to be careful of when using any system like this is that at full extension of the ram and full droop you are not binding your Ball Joints. Also with the suspension at full droop and the hydraulics fully retracted that the springs are still tight on their seats. Also if using...

Hi there Woody, I do not wish to rain on your parade but yes we do have emission standards for low volume vehicles in NZ. Low Volume Vehicle Technical Association Inc. ::: Documents Have a look at the( Exhaust Gas Emissions 90-10) standard. At the above link. It might also pay to have a look...

My observations on pads from personal experience are, DS2500, a little wooden in feel at high temps, have not had them fade at all. reasonable on the discs, OK cold but needs higher pedal pressure, Not the best un-boosted. Will not buy again. DS3000, as above for feel and no fade. Very harsh...

The 6207 C2 bearing has a nominal internal clearance of less than normal. 1-11 micron. The normal 6207 has 6-20 micron and the C3 has 15-33 micron. If this has been designed to operate with a C2 then the closest fit would be a standard 6207. As you can see there is a cross over point where you...

I cant help you on strengths or weaknesses. However I do know that the ring gear can Not be flipped. Try doing a search and you may find what you are looking for.

Another option for a delay off timer is, Dear i say it is a Turbo timer. They are normally adjustable to several minutes. A couple of relays on the output and you could drive both pump and fans.

I would suggest that this is showing the result of the crank being balanced. I think what you seeing is what is called the residual imbalance. As it is near on impossible to get as perfect balance and balancing is normally done to a standard there is normally some residual imbalance left. The...

The sound of the electric pump pulsing could also be the pump Cavitating as it can not get full flow through the bypass hole you have drilled.