Search results

Its a few for sale in France, on leboncoin.fr Just type in GT40 in search

Just take some measurements, make a sketch, email that to a metal workshop, or search on ebay for welding service and you’ll get them made. Its a dead simple triangle bit of ally, few welds, a bonnet/hood bolt.. sorted. Or make one in metal.

PM sent Look at build logs from SGT. Alot of info there.

Small pipe in front of tank goes to vent on funnel tube connected with fuel hose, two welded on AN fittings on side rear is in & out for efi, rear lower is fuel out to fuelpump. If not using efi, advise to run extra vent line from AN fitting to front of funnel with Y or T piece. Something like...

Stewart Warner Tacho : Jones Motrola

https://www.finishlineaccessories.com/p-8-turkey-pan.aspx I used this one, but it needs to be flat by the dizzy, not round/oval. Mine fits, but tight squeeze by the HT-leads. Morten

Which ever button rocks your boat. Its a big panel to fill:) You could do one button each pump, incase one pump goes on strike you could, or you can run both at the same time if opening up fully on the track. Many options, or even a 3rd pump joined as a reserve:) Diodes by the fuel gauges for...

Its still there among a few other GTs

Mine is level with my 1in dropped floors, Moroso cobra pan, but would opt for a double pan with reservoir at the rear. Also more space for handbrake bars

Try Audi 2.5 & 2.7 tdi Post in thread 'Audi 2.7TDI transaxle' https://www.gt40s.com/threads/audi-2-7tdi-transaxle.32549/post-354423

P1016 is metallic

Antique Bronze poly

Same here, I did the same. No real need for them as with all the other bits I’ve got boxed up. The chase of finding the parts is alot more fun than fitting them.

Its still a few out there, though this is a ‘71 I’ve paid up to £250 for one and as low as £50 for 4 of ‘66 with dings in them. Just need to keep a look out for them.

I think that most of the ‘66 & ‘71 I have are frosted. I should have some 15 or so lights in boxes now. Few had kinks but with the help of a dear friend who straightened them out I have a few sets thats all in mint condition. They pop up every now and then online.

Mk1 or 2?

Microgramma Bold ?

Top hole is 470 c/c to floor. midle hole 460 c/c Lower hole 450 c/c Could be advantageous to wait with these holes until you have the steering coloumn to fit as they should be on 9.28in radius from top bracket mount. But all depends on coloumn fit.

Could you please elaborate on what has raised the bar?