Search results

It's true what the UK guys say about the SVA, they certainly are a law unto themselves. The DVLA/Goverment expect us to conform to a set of 'standards' that are far from standardised!! As mentioned above, most high speed machines that I have worked on induce high frequency stresses but none...

G50/52 G/box for sale. Good condition, £1200 plus delivery costs or buyer collect.

Personally, this will give me more leg room by moving the pedal box forward & a better driving position. My thighs currently rub against the underside of the dashboard. OK if it were an 18 year old blonde but fibreglass doesn't do anything for me!! I could re-position the overhung pedal box...

I'm looking into the possibility of fitting a floor mounted pedal box in my GTD40. (Future project) Has anyone done this? I've only had a brief look at this but it would appear the steering rack needs relocating (rotating through 90deg & raising). I assume you need extension bars to link the...

Try this link Doc. Vintage Wheels Charrington Motorsport are quite expensive, unless you have unlimited funds! However, they are "original" as cast from original moulds. There are alternatives, I believe Wealden Engineering are suppling some nice imported wheels from the US. Search the site &...

2 x 21/4" by 10 1/2" 275lbs brand new springs for sale. £20 for the pair.

Congrats to all involved, exellent quality & content.

Thanks for your help Paul. Just hope this solves the problem & I don't fry the MSD again!!

Cheers Paul, glad I asked as I had intended buying from Demon Tweeks who are £66 dearer! Anything important I should know about when wiring the unit ?

I have fitted a manual master battery cut out switch (FIA approved with removeable key) inside the car but I would like to fit 1 on the outside, just behind the drivers door. I'm leaning toward the push button type as these are unobtrusive. Can anyone reccomend a supplier/type?

Does anyone have a Camber/Castor gauge &/or Corner Weight gauge I could borrow for a couple of weeks?

Have you reserved your tickets yet Malcolm? I was hoping to go with my Father but due to work commitments we cannot both go on the same day, I therefore have not as yet ordered any tickets.

I have now written an AutoLISP program for involute gears, if anyone rquires a copy please contact me. I am by no means an expert but the program works fine for the application for which it was written.

Best wishes & get well soon.

Bit off the wall this one but as there seems to be a few members who are proficient in CAD I thought I would ask. I need an AutoLISP program for drawing involute gears, must be compatible with AutoCAD2000.Can anyone help? (I know I'm being lazy but I haven't got time to write 1)!!!

Rob, I had the same problem. What I did was to measure the amount of interference between the anti roll bar drop link & the track rod link arm the make some spacers accordingly & add 5mm. These spacers shuold differ in length from N/S to O/S, although I cannot remember what these measurements...

I recently managed to 'blow up' my MSD unit when the engine continued to run even though the ignition switch had been turned off.(Read previous post on MSD). Before I install the new unit I would like to know if it is possible to fit a battery master cut out switch in the main feed (large red...

Can anyone let me have, or know where I can get, dimensional drawings for the Ford 302 engine? Any help greatly appreciated.

Heater has now been sold. Thanks for all the interest.

Re: Painting my \'40 Thanks for the info guys. I've just spoken to the bloke who will be spraying the car & he is happy to accept the car prep'd by me. BUT, he does reserve the right to redo anything he is not happy with prior to painting. As suggested by rbrunckhorst he would not be happy...