Search results

Hi Marc Your location , budget and aims for the car would help a lot for responses.

Hi. Are you sure its a KVA and not an ERA ? , do you have any pictures ? KVA did not make any roadsters and one of the earliest of replica's originally done in the 1980's with a Citroen or Renault transaxle. The ERA was a completely different thing, expensive but accurate. I have a...

Probably 295/15 on 15 x 10 inch rims for the rear and 215/15 on 7.5/8 inch x 15 for the front

your looking at the wrong Avons. the CR6ZZ are fully road legal. They are a great tyre

i fitted a Davies craig electric waterpump mounted up front and DC blanking plate. No need for a bump then.

Hi Roger. I bought a built motor from the states and found on my engine that the intake manifold bolts had almost no torque on them. The gaskets tend to collapse quickly and you have to retorque them. Im very lucky water didn't get into my engine because I spotted the problem. As has been...

A set me for me please andy , cheers!

You'd be surprised Spike the Avon CR6zz most of us use on 15 inch wheels is very grippy

Hi Spike. If you really are going to get that sort of horsepower then a Quaiffe or G50 is the only really safe option. The Renault UN1 can be strengthened with some expensive shafts but they have a weak 5 th gear. The Audi 01E I don't believe is any stronger but like all these things its about...

When you get to your shop perhaps you could send me a photo ? , I could get the links made no problem. thanks

Hi Tom Is that one that has fitment for an SPF ? not in any great rush , be interested in learning more about what you have

That's exactly what I'm after, did you make it it or source it somewhere ?

Hi all . I'm after a rear sway bar (anti roll) bar kit that is authentic to an original mk1 , i.e one that goes over the exhaust. I have an original tooled exhaust so the standard supplied bar that goes under the exhaust doesn't fit. Does anyone know of an off the shelf kit of parts that are...

I would love one Andy if the external dimensions matched my aperture

Hi Bill. With a front mounted EWP there is no bypass hose, Davies Craig recommended drilling two small 5mm holes in the thermostat, and that's it. Really trying to understand the effects of the positive and negative of the pump. Maybe I just pipe into a bucket of water see if air bubbles come...

Thanks Tony. Did you ever try putting the DC pump on the other flow side, ie pushing toward the top hose of the radiator? At the moment I have taken off the inlet manifold to tap the rear water passages to see if that helps. On my last EWP installation I had the pump mounted on the front of the...

Hi all. I want to connect up a bleed from the top of my radiator to the header tank to aid bleeding. However im using a Davies Craig EWP 130 remote pump to pump coolant up through the tunnel up to the engine then returning back. The bleed point I have in my radiator is obviously in a lower...

Hi. I have ditched the mechanical water pump on my SPF 40 and fitted a remote front mounted Craig Davies pump in front of the radiator and in place of the water pump housing fitted a blanking plate Craig Davies make specifically for the Ford Windsor engine. Very neat, provides better constant...

. .Hi Phil. I imported a 331 Ford recently with alliance shipping group. I think the shipping cost was around £600 ish for a 250 KG container to my door. The service was brilliant, very good up to date information all the way through. They arranged the local pick up from the engine shop and all...

Hi Andy. Yes the mtgs are usually the first Tuesday in the month. Drop me a mail to [email protected] and i'll put you on the monthly reminder mtg email i put out or call anytime.