Search results

this one is 30 x 40, bout the right size. only thing i would do different is epoxy or cover the concrete floor.

Happy birthday Grampa!

and the all important make sure the rack is centered with the frame, not necessarily with the rack itself if it is off centered.

was leafing through one of carrol smith's books and he said to use zinc chromate on aluminum. i was over looking at an rv7 build and the guy had spray canned some on the interior of his aircraft and it didn't look too bad. kind of a rough texture though.

whooaaa! bad boy blue!

i was reading the how to prevent a/c corrosion because i was interested, and they refer in most all cases to water being the main culprit, salt, mud, battery acid, and didn't see anything pertaining to a well kept race car. they even referred to coatings covering up or masking problems.

....or your grenade..... Grenade Fishing Gone Wrong EPIC FAIL - YouTube

thanks erik. had no idea of the cost of rebuild, $200 or $2k, do it yourself or send it in. may have to rethink the wish list, that is some serious racing.

lot of old aluminum aircraft still in the sky, and on the ground.....

wow, that is some good information! what is the cost to rebuild some of the sequentials?

Looks like he is part of the Goldmember Clan now! Looks good.

i wouldn't sweat the small lines too much, i had a cobra with -10 lines, probably total 10-12 feet through oil cooler and filter and the engine lived. i changed to shorter routing and -12 and removed the cooler and picked up pressure. long as you don't use the hard 90's you should be fine, but...

PAC Racing Spring 1.550" OD Roller Dual Valve Spring, 225 lbs on seat, .710" maximum lift, Max .050 duration 260° #8000. Manley 10° Chrome Moly Retainers #8511, 10° Bead Lock Valve Keepers #9009, Viton Valve Seals #6612, Hardened Spring Seat #8048. these are as issued from afr, 3-4 keepers...

if it is on the scavenge side i think an oberg style up high would work good for checking debris. on the pressure side i would prefer something like a 100 micron canister prior to the cooler, then another smaller micron prior to the engine. otherwise you have to hope nothing comes loose in the...

That is a heck of a motor John. LS engines make a very good platform.

I had an '02 ZO6 with the ABS, and really didn't see any reason for it, til one day. Driving in a heavy rain down the highway, I could feel the ABS actively working, keeping the hydroplaning tires in contact with the pavement and the car in a straight line. Very impressive. Then along comes a...

Be careful here. My JBL has a 20:1 steering rack and it is correct for the suspension. If you change to a quicker ratio at speed the transition is very quick. I tried 16 & 18:1 ratios and it was white knuckle! The designer told me I would kill myself and I believe he was right. At slow...

I don't know how it is adjusted, but if you determine you need to adjust, once the tire is in the air take another measurement, then using that measurement turn your joint then measure again without dropping the corner. get your desired adjustment amount in the air then set it down and measure...

X2 Length:4630 mm 182 9/32 Width:2000mm 78 47/64 Wheelbase:2920 mm114 61/64 Front Overhang:780 mm30 45/64 Rear Overhang:930 mm36 7/32 for us midwesterners....

yes it is, and the lobe seperation was something like 122.