Search results

But if Mahlon had the Wilwood stickers (and that box!), then it'd run you $30 plus shipping. ;-)

Yup...it was the stickers, they all wanted the Wilwood stickers. LOL

---SOLD---

--SOLD!!....thanks, Bryan!

These are all brand new, never used. 3 - 4 oz. Universal remote reservoir kit without fittings. 3 - 10.7oz Reservoir Combination/Tandem Remote Master Cylinders (Current Style, Screw on Cap) Free Wilwood stickers included! Wilwood brake accessories web page $30 for the box of...

Same results as Dwight with the 315's. My spare set of 315/30-17s rear wheels/tires fit in a +2" RCR rear hip with no issues. You'll need to lower the suspension a bit compared to the 295/50-15 Avons due to the smaller overall diameter of the 17's. I think you've already seen the thread and...

I'd highly recommend the ZF... Do your research on the Audi O1E's, First of all, the lower gears may not be optimal for your V8 setup. Correct me if I'm wrong, but don't the majority of these transmissions come with a 3.50 first gear? If so, it's a pretty worthless granny gear and most...

Well, you know they are both light cars and those turbos can be easily upgraded for much higher HP/Torque numbers and have been used in the 935 race cars (1000hp?). Anyway, the 4 and 5 speed 930 transaxles are an excellent choice for high power applications and are affordable when you can...

The Porsche 930 (wide ratio 4 speed) transaxles are pretty much bullet proof. They pop up here or xBay from time to time and run about $5k or so.

Hey Phillip, If you go 15" or 17" you're pretty much limited to 24.5" overall diameter front tire (24.7" if you're lucky), with the RCR. Can't speak for other makes... That usually corresponds to a 205/60-15 Avon CR6ZZ Radial or a 225/50-17 tire for most applications. If you go Avons...

Reduced to $50, plus shipping.

Congrats, Phillip. I thought the same as Jac, keep moisture out of it. If you leave the heads on perhaps take a look inside with one of those cheapo USB borescopes. Isn't OH one of the 'rust belt' states? Hopefully the cylinders were treated early on with some sort of corrosion...

Steve, RCR should be able to provide you the part, if not, you can check with Cushman Competition or Bill Hough Composites. Both are in your neck of the woods...

Hey Randy, the Borla Induction manifolds (Both the throttle body or Weber-Style) employ a manifold that has cast-in plenum facilities for the MAP sensor and the Idle Air Control. My IAC and vacuum plenums are hidden under the manifold and work very well using the GM sensors and IAC stepper...

Cliff, FWIW, I buy most all my EFI parts and plumbing from GoodVibesRacing out of Whittier, CA. They're friendly folks and ship fast!

--SOLD--

-6 is all you need. Should be able to support 600hp at 4 bar, maybe even 3 bar.

--SOLD--

--SOLD--

Door Eyebrows, as delivered in raw form from RCR. New, never used/mounted. $90, plus flat-rate shipping from Colorado. From RCR's site...."All GT40s have doors that cut deeply into the roof. At high speed, the doors tend to lift out of the body. These lightweight fiberglass "eyebrows" keep...