Search results

I have a Vantop H610 Mirror Camera in my car. I put the rear camera in a Nissan Satellite Radio Antenna Mount. This thing works great! And with the rear camera location on the spider, I have zero blind spots. Low profile and not as boxey looking as the SPF offering. Rod

Darius, I used CVF's Single Groove Water Pump Pulley on my engine. Got away with just a small bump-out on the firewall panel. Rod

Dylan, PM sent.

My only experience with serpentine is that the one Prestige offered me definitely did not fit. Their Alternator & A/C Comp were mounted on the RH side of the engine. The lower part of that Raptor system looks like it may fit in the engine bay, but the those upstairs components may come into...

Randy & Vinny, Regarding those pipes to rear clam interference. Last year, I contacted RCR because of this very same issue with my 302/363, and showed them what they could do to correct it. It's the #3 pipe on the LH side that is too high. They asked me to return them in order to put them on...

I used Delrin and had a friend with a lathe make them.

Jamie, I PM'd you. Rod

Randy, I PM'd you. Rod

Dave, no you can't 'buy' them. They're FREE. I sent you a personal message. Rod

Now that I have almost reached my journey's end of building an RCR40 MK1, I have a bunch of things left over and it's all FREE except for the carburetor. With the exception of the carb, these items are all brand new and never been on the car. Shipping to you from S.E. Michigan at your...

These are the O/S mirrors I have on my RCR40 Mk1. They are solidly attached with a 1/8" thick tapped piece of aluminum i/s the door skin. I like the look of them, but they are small and need to be adjusted perfectly to remain only minimally useful. I considered semi-truck mirrors, but...(just...

I used Thermo-Tec Thermo-Shield Tape #13995 from Summit. Probably other sources for it as well. 2" X 50' adhesive backed roll. I wrapped it around each tube like you would tape a hockey stick. I think the tubes are stainless but someone else would have to verify that. Rod

PM'd you

Dave & others. Daniel came & visited me during my build which at the time was maybe 75% complete. He looked the car over, sat in it and asked a lot of good questions. I believe that I was open and honest with my responses & feelings. He then went home to think. Daniel is a VERY young man...

From one Rod to another, welcome to the fun!

Hi Sean, Everything is looking great! What are you using for attaching your windows? On mine, I've drilled & tapped for #6 screws. However, I had trouble with the fiberglass lip not being quite wide enough in a couple of areas. Lower part of the headlamp covers for one, but especially the...

I guess that with these cars it's just a matter of personal taste. What looks good to you? It's not a GT40, or a FORD GT, or even a FORD for that matter. As for me, I spent some time looking at a lot of pictures. I decided I liked the look & simplicity and just had 'FORD' put on my side...

Pat, Shortly after I received my car, I took it to my painter to have a look at it and do some preliminary stuff. After that, I retrieved it and built the car to about 95%. I put 100 miles on it recently and sorted a couple of things out. 2 weeks ago I drove it over to the painter for some...

Just bought a set here in the U.S. Qty 2) 215/60R15 Qty 2) 295/50R15 $2500 total shipped to my door Ouch! Rod

Steve, Nice job solving a problem using a rather interesting bit of machining! Ya gotta love ingenuity! How many of those Dremel discs did you go through to do that? Rod