Search results

To do list: Small AC leak at compressor low pressure line. Recrimped it and will try some more R134. If still leaking will cut and get new fitting. AC is really cold otherwise. Chased down the electrical problem for 4 hours before testing the trinary switch. It works and will not turn on...

Gunmetal on the Gurney. Will do diffuser next. Gotta figure out ac wiring again. Compressor not kicking on.

Wilwood here as well.

Next time out let me know how hot the nose of the car gets. Mine feels scorching above the radiator.

Saw H shift into reverse using one hand. Put hand on base of lever and use thumb to flick up the reverse lockout. I was this old when I learned this.

I will do white stripes with tangerine borders. More like the 2017 GT. I don't like when the white goes into the hood cutouts.

Car has been getting some little stuff done with H. New front tow hook in center of air dam. Glass rear windshield and windshield install. AC charged. Side windows removable and installed. Working kill switch. Gurney flapped. I hated the Speedway turn signal I had mounted to the roll bar...

I had mine below the Gurney flap. H said move it up top. A low car is hard enough to see. See pics in my thread. Barely noticeable. Bought off Amazon for a Suburban. Under $20

The pic was just pre-shipping from Fran. Sorry.

Getting final (hopefully) prep done before paint. Lucky to have H-Craft nearby to mount glass and do the special touches (fix my mistakes). 8 hex head screws to hold side windows in place. Removable easily. And he is doing a couple other things. Car is for track use and C&O...

I am 3 years and 1 month into my GTR build. Some of the work farmed out to H-Craft. About 6 months off total doing other projects like moving and building a new garage. So over 26 months I put in 4-8hrs per week with a mechanic buddy. Lots of small frustrations, installing and removing...

Put on a coat, gloves, hat. Snow chains and let her rip.

Looks really cool. Would love to see Hazards in there and then a You-tube video and parts list with lots of pics for those of us who are not electronically inclined.

Title and tags in hand. car with H for TLC

No update on car. Toe healing so I can ride recumbent and walk. Can drive car. Still need to get with H for some finishing touches. Big news is license plate getting mailed.

Taking a little time off. MT tag update: IVN check cleared, now awaiting MSRP from RCR to figure out tax implications. I believe if over $150k, MT takes taxes before they issue. Glad I am around $75k. Hopefully in 3 more weeks. At this point I only need to charge the AC and leak test. Then...

DId not know how blue my license plate LEDs were. Liking it.

For my GT-R with Graz and RCR axles. CV part number is on my thread to see if same part number you use on SLC. https://www.gt40s.com/threads/steves-gt-r-build-thread.51274/post-553523 Driveshaft shop part number: ABS-GM-10-X9 ABS Ring Machined for 108mm CV $40.00 The Driveshaft...

Got the mesh done on the rear as well as re-did wiring. I have the rear panel now easily removable with a pair of 4 wire trailer harnesses and 2 bullet connectors. Added the rear lid mesh. Will ask H to add the rear glass. Front mesh easier than expected. Had flat surfaces for drilling and...

Clutch?