Search results

Sandy I am researching going down your route. Effectively on a RH drive car my reservoirs are on the "wrong side" ie the LH side.(There is'nt room with the way the air con is set up to have them on the RH side and ensure that they are above the height of the calipers which I prefer to do)...

Sandy Ooops - just re read your post, 1/8 pipe, John

Sandy Thanks for that. I have been looking at using Goodridge -6 600 stainless braided brake hose and Seal-It special grommits but will also look at your solution:idea2:. Certainly won't be using the supplied stuff:smash:. Sandy as you perhaps know I trained as an engineer but a (very)...

Sandy Pedal box..........If that turned out to be my only option I may stick with the pan heads........:laugh: Mounted the CNC reservoirs on the mono, well worth the extra effort (ss button heads of course) IMHO Thanks for checkin' out the thread size. Best John

Sandy What thread is on the pan heads so I can order some ss buttons? John

Sandy Another great idea, your not per chance a style guru in the day job?:laugh: Best John

'Ello all Purchased a couple of SVA compliant level sensors and opened up clearance holes in two of the screw down caps atop the beautiful CNC reservoirs to enable them to fit. I then broke the level sensors apart, removing the supplied cap (not required) and float tube from the main assembly...

Fran Re selector mount. Bolts have button heads on the tank side, would you still recommend tank tape? John

Simon Fran supplied an Ally L section bracket which bolts to the tub side, see pic below. Are you still waiting for your bits from Fran? Guys, thanks for your comments, main reason for opening a build site here was that it will ensure that I continue to try and match the quality of some of...

'Ello all Picture of a ZF-Q a guy who lives local to me has installed in a customers car. Looks a beautiful piece of kit. Since this is my route I also spoke to a couple of early adopters including one who had previosly used a ZF - all very positive with the sweetness of the change being a...

The guy to talk to is Chris Melia on 0044 1638 510136 in the UK. There is an excellent thread in manufacturers announcements on this Forum showing the full ZF-Q development story. As I understand it most of the first batch were shipped to the US earlier this year for installation in...

'Ello all I am fitting a 157tooth Flywheel to the back of the LS7 with a 10.5 inch dia clutch. Three questions for those who know. 1. I would like some recommendations on which clutch manufacturer/model people have used successfully with 500+bhp 2. Billet Steel or Billet aluminium (6075...

Hope I'm not to late with this post. I am fitting an LS7 into my RCR40. The new Quaife ZF-Q complete with Quaife Bell Housing (which can fit either LS or Ford) is the route I am going down. Pm if you want more info John

'Ello all Anyone fitted a Chevy LS to a ZF? I will shortly be fitting an LS7 to an Quaife ZF-Q using the Quaife/Chris Melia bellhousing which has been manufactured so that it can fit either Ford small block or Chevy LS. Chris has kindly offered to come over to my place and assist with this...

Paul Pics of the Tilton pedal box. These pics really don't do the product justice, they are a truly superb piece of design and engineering. The only product I could find to match the Tilton are from AP but they have under floor pull type master cylinders and ruled themselves out on height...

Andy You should'nt have told me that as 2009 classic seemed a good date to work towards...... Ever optimistic I hope to be ready for late spring next year :lol: Sandy, thanks :thumbsup:..... 'aint this a great forum, so many helpful guys John Andy & Sandy........sounds a great name...

M3??? thread drift??? Clarksons opinions on cars erm............ Pete has the best advice, check 'em out (thoroughly) and take the one you like best. Did this and the RCR did it for me. Good hunting John

Sandy Havn't drilled pick up points on the lower wishbone, am waiting on some parts from Fran. But if you go to the RCR40 build manual there are good pics published by Fran John

Sandy Many thanks for taking the trouble to measure John

Sandy More pics of sway bar mount. John