Search results

thank you all, I might just order steel, it makes a lot of sense!

I will, I will send you a PM. thank you!

i also discovered that one side of the rear suspension had the wrong spacers, to big, they are floating on the bolts and mounted with to many washers so the bracket were spreading any idea if these aluminum washer are available somewhere? I also received the custom shroud, next week end plan!

I received the correct rear hinges and decided to tackle that last week end. I am still missing parts (checking with RCR) to be able to install them properly (u shhapes bracket and rods), but at least i could make progress. first issue, the mounting bracket going on the hood is off, the spacing...

headlight cut out are finished and headlight are modified. I now need to modify the fiberglass brackets and attach them to the body. I was wondering if anybody found something to "seal" the hella headlight in the hole to avoid debris to enter the headlight from around the hella light? I also...

thank you Kurt. if this is the way to do it, I will do it like that. i am surprise there is no template from RCR for that. thanks for the pictures!

How do you drill and cut the door hinges? just based and the sharpie's marks ? same for the "holes" under the hood?

Waiting on feedback on my rear hinge from RCR. This week end I worked on the front and rear clips locks. Placed the first one, made a template to install the other side and after drawing it on the other side, something was not right. The 2 vents are not identical and the driver side is bigger...

Thank you guys. That's what I was thinking. I received my kit this year so I should have the good hinges. I will reachbput to RCR.

Update from last week end: I got help from @Hoffkm12 to align the front and rear clips to the spider (and the tub). locators pins are in place, but I have no picture next step is putting the hinges from front clips, rear clips and doors For the rear clips, I have these parts. the brackets look...

For sure! I will remove the body after again. I was trying to fit the body to see the clearance for piping and harness... still have some electrical work to do and run my AC line after that. But thanks for the heads-up

Sounds good Kurt !

and to have a win on something this week end: I know, it is early, but at least it was successful! It's now covered wit tape! next step, installation of the new steering rack so i can try to center the body before bolting the tube to the chassis. Still looking for information on th eposition...

after cutting and cutting the tube at the bottom to lower it, I still had the issue. It looks like the dimension of the tube and the body are not matching. The issue is the dimension of the bulk/roof panel compared to the top portion of the spider, and clearly more in the passenger side than the...

Anybody finish the instal on a SLC? The one picture on SLC is showing it not sitting on the footbox and I am wondering why?

thanks Joel and Kurt! I was thinking cutting more, it is good to know you had to do that. I only cut the "floor" of the tub, so i might have to cut a little more on the "sides" to move the tub down. interesting you had to cut the center. Well this is a big job to get to the tub so it will be a...

Thanks Kurt, Do you say that in general or you see something not working? Yes I definitely need to come check it out!

Some update on trying to fit interior panels, to be able to look at clearance so far with the spider. I had to trim the dashboard a lot more than on the line for it to fit between the tubes of the front hoop. It could fit without the plenum under as it is seating lower around the hoop, but not...

thank you Joel, that's my homework for tonight !

I am starting to work on the dash wiring. My car came with the new Koso RX4. I have a couple of questions on the wiring that maybe someone has answers (or if you know a post about wiring the dahs, I couldn't find one): where o you connect the light for turn light..... on the dash? from the...