Search results

Cav#99 351 base engine & zf with modified oem ford pan drops right off. It has front sump and added section at sides with baffles etc........forever ford!

MSO (MANUFACTURES STATEMENT of ORGINE) STATES WHO MADE IT AND WHAT "YEAR" VEHICLE IT REPLICATES.

Everything is for sale for a price. What range are you planing on spending? Did you want an OEM type car or just a looks like it driver? ZF or Audi gearbox? Fire suspression system or just a clip on extinguisher?

Check the float levels at both front and rear bowls by removing the flat brass screw on the side of the bowl with car on flat level ground. If gas rushes out or is not oosing out when you rock the car a little, then they are off. This will make it run rough and foul the plugs as described.

The greenhouse effect is the biggest factor. Walk up to the car even on a mild sunny day and open the door and slip in. You will be sweating in short order. My a/c went inop the first of this summer. I had a few events to do before getting it fixed/recharged and removed the side windows to...

on some of the early ones I have seen It is "clear" Plexiglas both top and sides. It appears about 1/4 inch thick to withstand the air velocity at maximum speeds . The early IMC & Testors model kits represented this correctly on the MKII kits back then. The photo's above appeared before I...

Both times i got him by phone. (didn't get an email response for 2 weeks; very help full/ great guy

I found a used Exoto Daytona Coupe (#5 1964) 1/18 scale at a local diecast model shop for $105.00. It's wasn't very hard to get the $helby signature off the roof. Peter Brock, Bob Bonderaunt, and Allen Grant now reside there on the roof and atop the front fenders from 2012 Monterey. I'am on the...

Must have been made in France. This was in the the 4 year winning cycle for the GT's, butt yet they put the "looser" in front! What more could one expect...........

Hartford does my GT40 & Brock Daytona Coupe....no issues.

It sounds like this seller has an extreme case of cranial rectidas! I purchased a GT40 that was built/registered in Ca. and has the SB100 certificate also. It was in Navada where I bought it, then hauled it to Washington where I titled it using the MSO that came with it to get 1966 licensing and...

For the best looking show signs in the world go to davidgphotography.com Custom photography ..classic & vintage cars and you will see. He can use your photos in most cases. On the description and wording keep it simple, no one, or most people at a car show don't care about it's demensions or the...

Was it hit in the rear?

When I first got my CAV it had some drips from the right out-put seal. I needed to check fluid levels. I did a search and got multiple different answers. I called RBT and got transferred to Lloyd the owner of RBT. Lloyd said to use "NO" additives at all! Amsoil is "Snake oil" IMO, so...

What shocks is anyone here using on a pre- 100 CAV (#99) other than Spax? I'am DONE with them. What brand is available here in the USA and hopefully made here also, that will fit this momo chassis?

Yes! It IS a clear window to view the engine oil level in the oil tank. This window was also done on the J11 car that was on display with 10 other original GTs at the Kirkland event in Washington state 2011.

Butter! Mine shifts like butter now. It's all in the finite adjustments both in the cables, linkage at the far end cable attachments, and also in the shifter box linkage where I found the main cross bolt had backed out a bit. It took about 3 hours of dinken around to get the right combination...

Tom: I have CAV #99 produced in 2004; I found a diagram attached to the bottom of the access panel that covers the fuse box and pedal assy's. (on mine anyway)

I have had a similar dieing issue. I found on warm days after the car sits for a few minutes, 10 to 20 minutes after having driven to full running temp, restart and drive away and in about a block of driving suddenly boggs down and dies out. If I throttle into it and pump the throttle and...

I don't see a cir-clip or ring groove on the good new axle or on the broken one. What holds the stub axle in the hub on this CAV design? I can find any info on how to get them apart or any diagrams/photo..............Inquiring minds............